[asterisk-users] Asterisk and TDM400P ?

[Giorgio Incantalupo]

Hi Noc,
I had similar problem. Check If you have netjetpci module and try to 
delete it...this solved my problem.


Giorgio Incantalupo



Noc Phibee wrote:
> Hi
>
> i have buy a Digium TDM400P with 1 fxo modules TDM01B for connect
> my asterisk to a french analog line.
>
> In my zaptel.conf, i have:
>    loadzone=fr
>    defaultzone=fr
>    fxols=3
> when i load the module, i have in logs:
> Nov 24 06:13:40 gw kernel: Freed a Wildcard
> Nov 24 06:13:40 gw kernel: Zapata Telephony Interface Unloaded
> Nov 24 06:13:40 gw zaptel: Removing zaptel module:  succeeded
> Nov 24 06:13:42 gw kernel: Zapata Telephony Interface Registered on 
> major 196
> Nov 24 06:13:42 gw kernel: Zaptel Version: 1.2.9.1-1mdv2007.0 Echo 
> Canceller: KB1
> Nov 24 06:13:42 gw zaptel: Loading zaptel framework:  succeeded
> Nov 24 06:13:42 gw kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 
> 21 (level, low) -> IRQ 20
> Nov 24 06:13:43 gw kernel: Freshmaker version: 73
> Nov 24 06:13:43 gw kernel: Freshmaker passed register test
> Nov 24 06:13:43 gw kernel: Module 0: Not installed
> Nov 24 06:13:43 gw kernel: Module 1: Not installed
> Nov 24 06:13:43 gw kernel: Module 2: Not installed
> Nov 24 06:13:43 gw kernel: Module 3: Installed -- AUTO FXO (FCC mode)
> Nov 24 06:13:43 gw kernel: Found a Wildcard TDM: Wildcard TDM400P REV 
> I (1 modules)
> Nov 24 06:13:44 gw kernel: Registered tone zone 2 (France)
> Nov 24 06:13:44 gw zaptel: Running ztcfg:  succeeded
>
> and my problems are whit all sample that i have, asterisk don't 
> restart and put me:
> Nov 24 06:15:17 NOTICE[2943] cdr.c: CDR simple logging enabled.
> Nov 24 06:15:17 WARNING[2943] chan_zap.c: Unable to specify channel 3: 
> No such device
> Nov 24 06:15:17 ERROR[2943] chan_zap.c: Unable to open channel 3: No 
> such device
> here = 0, tmp->channel = 3, channel = 3
> Nov 24 06:15:17 ERROR[2943] chan_zap.c: Unable to register channel '3'
> Nov 24 06:15:17 WARNING[2943] loader.c: chan_zap.so: load_module 
> failed, returning -1
> Nov 24 06:15:17 WARNING[2943] loader.c: Loading module chan_zap.so 
> failed!
>
> for all channel (i have tested from 1 to 5)
>
> my zapata.conf:
> [trunkgroups]
>
> [channels]
> context=default
> signalling=fxo_ls
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> busydetect=yes
> musiconhold=default
> channel => 3
>
>
>
> where is my errors ?
>
> Thanks for your help
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>