[asterisk-users] Can anyone enlighten me as to what this means?

[Matt]

Asterisk is connecting to the outside world.  I have 2 PRI lines to
the telco, and am using them as primary and secondary clock source.

span=1,1,0,esf,b8zs
bchan=1-23
dchan=24

span=2,2,0,esf,b8zs
bchan=25-47
dchan=48

Here's something else interesting..... Any calls placed from within
the telcos network completed fine.... it was only calls placed outside
the telco's network.   To me this yells telco problem... yet a restart
of asterisk fixed the issue...


On 11/22/06, Paul Hales <pdhales at optusnet.com.au> wrote:
>
> Are you connecting your Asterisk box to the outside world or a PABX?
> (I got this sort of error connecting an Asterisk box to a pabx..)
>
> PaulH
>
> On Tue, 2006-11-21 at 22:28 -0500, Matt wrote:
> > We are doing PRIs into T4XXP cards.   When I call out things are
> > fine... however tonight sometimes on inbound calls I'd get:
> >
> > chan_zap.c: Duplicate setup requested on channel 0/1 already in use on span 1
> >
> > in the full debug log followed by a fast busy signal on the calling parties end.
> >
> > Anyone know what would cause that?
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>