[asterisk-users] Cisco media gateways in general

[Bill Gibbs]

Ditto - using a 3660

 

Had a few issues with crashes and poor performance on an IP to IP Cisco
(not sure what IOS version) where it was converting from SIP <-> H323
but I didn't have direct control of that box so it could have been
hardware (they were used) 

 

Bill

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Scott
Keagy
Sent: Tuesday, November 21, 2006 12:03 PM
To: asterisk-users at lists.digium.com
Subject: RE: [asterisk-users] Cisco media gateways in general

 

In my last job I set up Cisco 3845 with PRI cards, talking SIP to
Asterisk. No problems there... main trick to get it working for me was
to make sure Asterisk was not doing any authentication... add this to a
line of the [peer] setup in sip.conf file on Asterisk:

 

insecure=invite,port

 

In terms of IOS side, if you are familiar with enabling sip UA and
setting up dial peers, there is nothing special.

 

Regards,

Scott

 

________________________________

From: asterisk-users-bounces at lists.digium.com on behalf of Bas van der
Veen
Sent: Tue 11/21/2006 10:02 AM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Cisco media gateways in general

Greetings,

After the 0 respones I had on my previous mail regarding the Cisco 2801,
I thought I'd be more general.

Is anybody using Cisco media gateways at all? If so, how is it working
for you?

--
Kind regards, Meilleures salutations,

Bas van der Veen
GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x9E890160

"The question of whether a computer can think is no more interesting
than the question of whether a submarine can swim."
--Edsger Dijkstra

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061121/9921520b/attachment-0001.htm