[asterisk-users] PortSip and Astericks new install

[Charlie Grosvenor]

I have tried the configuration exactly the same of yours and it's still
not working. What could be wrong with my installation? I first of all
tried the packages in Debian stable, this didn't work so I compiled from
source but still the problem occurs.

Thanks

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Doug Lytle
Sent: 16 November 2006 00:47
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] PortSip and Astericks new install

Charlie Grosvenor wrote:
> Thanks for your reply, I have tried what you have suggested and get
the
> same issue. I have also tried express talk which connects then say:
>
>   
I just downloaded and installed PortSip2

I have an extension setup as

[4289]
type = friend
host = dynamic
username=4289
qualify=500
reinvite=no
canreinvite=no
nat=yes
dtmfmode = rfc2833
context = managers
callgroup=1
pickupgroup=1,2
mailbox = 4289 at sip
secret=12345
disallow=all
allow=ulaw
allow=alaw
allow=slin
callerid = Doug Lytle <4289>


PortSip2:

Account:   4289
AuthName: 4289
Password: 12345
Server:  YourAsteriskServer
Port:   5060

When setup, it just worked.  I'll have to guess that your Asterisk 
installation is a fault.

Doug



-- Ben Franklin quote: "Those who would give up Essential Liberty to 
purchase a little Temporary Safety, deserve neither Liberty nor Safety."
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users