[asterisk-users] Recording outbound analog calls with X100P

[Hadley Rich]

On Thursday 16 November 2006 06:44, Conrad Wood wrote:
> On Thursday 16 November 2006 06:42, Matthew J. Roth wrote:
> > As per ManxPower at #asterisk, it is not possible to record a call
> > dialed from an analog phone connected to the "Phone In" port of an X100P
> > because the two ports on the card are hard-wired together.
>
> A bit off-topic maybe, but does that then mean you can't
> make 2 simultaneous calls through the card? E.g.
> 1. Call:  pstn-phone -> asterisk -> sip...
> 2. Call:  sip-phone -> asterisk -> pstn...

As he said above, the ports are wired together. There is no FXS device on that 
card.

-- 
http://nicegear.co.nz
New Zealand's VoIP supplier