[asterisk-users] Headaches with Video over SIP

[Peter Howard]

On Tue, 2006-11-14 at 09:41 +1100, Peter Howard wrote:
> On Tue, 2006-11-14 at 09:28 +1100, Peter Howard wrote:
> > On Mon, 2006-11-13 at 13:42 +0800, Rosli Sukri wrote:
> > > any logs/errors when you do a verbose 6 and a sip debug ?
> > > 
> > 
> > I've got a log from a call under asterisk 1.4.0-beta3 attached. The
> > behaviour was the same; the call connected and audio worked, but no
> > video.
> > 
> > 
> 
> And here's /var/log/asterisk/messages as well
> 

<sigh/> More haste, less speed.  In the messages, ignore the connection
failures at 9:15 - the run in question is at 9:17.



> 
> > 
> > > On 11/13/06, Peter Howard <peter.howard at ursys.com.au> wrote:
> > >         On Mon, 2006-11-13 at 00:57 +0100, Patrick wrote:
> > >         > On Mon, 2006-11-13 at 10:45 +1100, Peter Howard wrote: 
> > >         > > Greetings all,
> > >         > >
> > >         > > I'm playing with asterisk and two Polycom VSX300
> > >         videoconferencing
> > >         > > units.  And I'm having zero luck getting video working
> > >         over SIP.
> > >         > >
> > >         > > The two units register fine with asterisk, and with
> > >         "allow=all" in 
> > >         > > sip.conf, the two units establish voice.  But no
> > >         video.  And no obvious
> > >         > > messages as to whats going wrong.  The config for each is
> > >         (they're
> > >         > > numbered 201 and 202):
> > >         > >
> > >         > > [202] 
> > >         > > secret=
> > >         > > type=friend
> > >         > > context=from-sip-202
> > >         > > host=dynamic
> > >         > > nat=no
> > >         > > canreinvite=yes
> > >         > > dtmfmode=rfc2833
> > >         > > disallow=all
> > >         > > allow=all 
> > >         > >
> > >         > >
> > >         > > If you're wondering why I do the "disallow=all"
> > >         immediately followed by
> > >         > > "allow=all", it's because the allow line has spent a lot
> > >         of time with
> > >         > > restricted codecs to see if that makes a difference. 
> > >         > >
> > >         > > I can provide the full sip.conf, extensions.conf, and
> > >         debug output if
> > >         > > anyone wants to see them.
> > >         > >
> > >         > > Any suggestions as to where things are falling down?
> > >         > 
> > >         > Do you have "videosupport=yes" in your sip.conf?
> > >         
> > >         Yes I do.  I've also confirmed that I have a version of
> > >         asterisk which
> > >         includes the patch for H263P (which is what the Polycoms want
> > >         to talk).
> > >         
> > >         --
> > >         Peter Howard
> > >         URSYS
> > >         13 Burwood Rd,
> > >         Burwood, NSW 2134
> > >         
> > >         Ph: 02 8745 2816    Fax: 02 8745 2828
> > >         
> > >         _______________________________________________
> > >         --Bandwidth and Colocation provided by Easynews.com --
> > >         
> > >         asterisk-users mailing list
> > >         To UNSUBSCRIBE or update options visit:
> > >            http://lists.digium.com/mailman/listinfo/asterisk-users
> > > 
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > > 
> > > asterisk-users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Peter Howard
URSYS
13 Burwood Rd,
Burwood, NSW 2134

Ph: 02 8745 2816    Fax: 02 8745 2828