[asterisk-users] wip5000 roaming
Andrew Joakimsen
joakimsen at gmail.com
Thu Nov 9 11:53:03 MST 2006
Disable WDS but set all the AP to the same channel and same SSID and then
make sure they are connected to the same LAN (IE: no NAT on the AP). Are you
using encryption?
Something like:
Try RxLevel -60
PreRoaming Enable RxLevel -75
Try over TxErrcnt 15
Try Over RxError Count 10
Play with the PreRoaming mode, see if it does help? It should however you
could notice a drop in battery life.
Would be a good place to start with your settings, adjust from there. I
would like to hear your results with these phones, is everything working
great besides the roaming?
On 11/9/06, Altus Snyman <altus at stormcorp.co.za> wrote:
>
> Good day all
>
> I cant get my WIP 5000 to roam 100%
>
> I have 2 access points, different SSI's
>
> I make a config1 and config2 on the phone, each for the different SSID's(A
> & B)
>
> Im standing next to A and I walk to B, but…the phone does not want to
> change its signal to B, it still keeps the bad signal from A
>
> If I power A down, it will switch to B, if I switch A back on and go stand
> next to it, it will still keep B's signal
>
> We got some wireless specialist's in and they set up WDS for us, in other
> words, you add 1 SSID for both access point
>
> IT works for windows, but not for the phone!
>
> Can anyone help, or give a bit more explanation on the roaming settings on
> the webconfig
>
>
>
> Try RxLevel (-103~0)
>
> PreRoaming Enable RxLevel (-103~0)
>
> Try Over TxError Count (0~10000)
>
> Try Over RxError Count (0~10000)
>
> Level Diff Higher Than Curr Site (0~255)
>
> Use Refresh PreRoaming
>
> Enable PreRoaming On Association
>
> PreRoaming Mode
>
> PreRoaming Refresh Interval (0:Disable, 0~3600)
>
>
>
>
>
> Thanks
>
> Altus
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061109/60ec55e3/attachment.htm
More information about the asterisk-users
mailing list