[Asterisk-Users] OT: AudioCodesMP124-C/FSX/AC/SIP

[Erick Perez]

Billy, i you manage to connect them, please let me know...im also in a
battle with it and audiocodes support line seems very unhelpful.


On 5/25/06, William Piper <billy at kersting.com> wrote:
> Thank you for your help, however I still cannot get this thing to connect to
> asterisk. I followed your instructions to the letter & couldn't get it to
> connect.
>
> I'd be happy to throw it up on a public IP if anyone would like to take a
> crack at getting it to work.
>
> Thanks,
>
> bp
>
> On 5/24/06, The VoIP Connection <asterisk-biz at thevoipconnection.com> wrote:
> > Here are the step by step instructions for setting up a brand new
> Audiocodes
> > FXS gateway for use with an Asterisk server:
> >
> > Connect the gateway to a network switch and connect a computer to the same
> > switch. Then configure the IP address of the computer to 10.1.10.2. Then
> run
> > your web browser and point it to http://10.1.10.10 and login using the
> > information below.
> >
> > Default IP address: 10.1.10.10
> > Default user name: Admin
> > Default password: Admin
> >
> > Goto "Quick Setup" and change the following:
> > IP Address => Set to the new IP address of the AudioCodes gateway
> > Subnet Mask => Set to the correct netmask for your local network
> > Default Gateway Address => Set to the correct gateway IP address for your
> > local network
> > Working With Proxy => Set to "Yes"
> > Proxy IP Address => Set to the IP address of the Asterisk server
> > Enable Registration => Set to "Enable"
> >
> > Restart the gateway then log back in using the new IP address.
> >
> > Goto Protocol Management -> Protocol Definition -> Proxy & Registration
> > Registrar IP Address => Set to the IP address of the Asterisk server
> > Registration Time => Set to "60"
> > Subscription Mode => Set to "Per Endpoint"
> > Authentication Mode => Set to "Per Endpoint"
> >
> > Goto Protocol Management -> Protocol Definition -> DTMF & Dialing
> > Max Digits In Phone Num => Set to a large enough number such as "32"
> >
> > Goto Protocol Management -> Protocol Definition -> Coders
> > Add coders as needed You need to set at least G.711U-law
> >
> > Goto Protocol Management -> Endpoint Settings -> Authentication
> > Set SIP username and password for each port
> >
> > Goto Protocol Management -> Endpoint Phone Numbers
> > Enter an extension (phone) number for every used channel
> >
> > Your AudioCodes gateway is now ready.
> >
> > Michael Crown
> > Managing Partner
> > www.thevoipconnection.com
> > 321.989.6728 ext. 611
> > sip:611 at voiceserver.thevoipconnection.com
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 

-------------------------------------------
Erick Perez
Linux User 376588
http://counter.li.org/  (Get counted!!!)
Panama, Republic of Panama