[Asterisk-Users] asterisk amportal start/stopped/start/stopped for all the time

[Tzafrir Cohen]

On Wed, May 24, 2006 at 12:26:33PM +0200, Shenen Shenen wrote:
> Hi!I've this problem to another asterisk at home machine, without digium cards,
> but only with a bri isdn card.It doesn't connect in the amportal
> graphical,(it's stopped), if I make tha amportal start command this is the
> result:
> 
> STARTING ASTERISK
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> 
> -----------------------------------------------------
> Asterisk could not start!
> Use 'tail /var/log/asterisk/full' to find out why.
> ---------------------------------------------------
> 
> if use the tail comand this is the result:
> -----------------------------------------------------
> Asterisk could not start!
> Use 'tail /var/log/asterisk/full' to find out why.
> -----------------------------------------------------
> [root at asterisk_179 ~]# tail /var/log/asterisk/full
> May 23 04:06:36 VERBOSE[4327] logger.c:  [chan_features.so]May 23 04:06:36
> VERBO                                              SE[4327] logger.c:
> [chan_features.so] => (Feature Proxy Channel)
> May 23 04:06:36 VERBOSE[4327] logger.c:   == Registered channel type
> 'Feature' (                                              Feature Proxy
> Channel Driver)
> May 23 04:06:36 VERBOSE[4327] logger.c:  [chan_zap.so]May 23 04:06:36
> VERBOSE[43                                              27] logger.c:
> [chan_zap.so] => (Zapata Telephony w/PRI)
> May 23 04:06:36 VERBOSE[4327] logger.c:   == Parsing
> '/etc/asterisk/zapata.conf'                                              :
> May 23 04:06:36 VERBOSE[4327] logger.c:   == Parsing
> '/etc/asterisk/zapata.con                                              f':
> Found
> May 23 04:06:36 WARNING[4327] config.c: Unknown directive 'switchtype' at
> line 9                                               of zapata.conf
> May 23 04:06:36 WARNING[4327] config.c: Unknown directive 'overlapdial=yes'
> at l                                              ine 22 of zapata.conf
> May 23 04:06:36 ERROR[4327] chan_zap.c: Unknown signalling method
> 'bri_net_ptmp'
> May 23 04:06:36 ERROR[4327] chan_zap.c: Signalling must be specified before
> any                                               channels are.
> May 23 04:06:36 WARNING[4327] loader.c: chan_zap.so: load_module failed,
> returni                                              ng -1
> May 23 04:06:36 WARNING[4327] loader.c: Loading module chan_zap.so failed!
> 

With a similar error, I asked you before for zatel.conf and zapata.conf
. I must repeat my request, I see. 

Do you use bristuff? If not: what ISDN channel do you use?

-- Tzafrir