[Asterisk-Users] GXP2k and BLF problem

asterisk asterisk at zinix.co.uk
Wed May 24 04:56:19 MST 2006


No,

            Rebooting the phones does not fix the problem. As previously
stated the only way to get them working again is to default the config of
the phone and rebuild.

 

Fadge

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Lee Archer
Sent: 24 May 2006 12:41
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] GXP2k and BLF problem

 

I run 1.1.0.13 on my GXP's and after stopping and starting the server I
either wait for the phones to re-reg or I reboot the phones.  After
restarting asterisk does rebooting the phones does fix the problem?

 

Lee

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of asterisk
Sent: 24 May 2006 12:25
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] GXP2k and BLF problem

Phones are configured for "asterisk BLF" . Like I said, the config works
when the phone is defaulted and rebuilt but stops working if the server is
rebooted. Show hints Gives:

 

-= Registered Asterisk Dial Plan Hints =-

   310                 : SIP/310               State:Unavailable
Watchers  0

   305                 : SIP/305               State:Idle
Watchers  0

   304                 : SIP/304               State:Idle
Watchers  0

   303                 : SIP/303               State:Idle
Watchers  0

   302                 : SIP/302               State:Idle
Watchers  0

   301                 : SIP/301               State:Unavailable
Watchers  0

----------------

-          6 hints registered

 

Thanks

 

fadge

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Lee Archer
Sent: 24 May 2006 12:01
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] GXP2k and BLF problem

 

Are the GXP's configured properly for BLF and what does show hints print?

 

Lee

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of asterisk
Sent: 24 May 2006 11:57
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] GXP2k and BLF problem

It does not happen with a reload of asterisk but when the server is
rebooted. I have set the register timeout to 1 min but this has no effect.
The BLF still does not work. The * is V 1.2.7.1. I can see the phone
register first time when phone reboots and would expect to see it
re-register every 1 min on the console if I understand things correctly, but
it does not.

 

Fadge

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Lee Archer
Sent: 24 May 2006 11:30
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] GXP2k and BLF problem

 

Stopping and restarting Asterisk will lose the hints, then you will have to
wait until the phone registers again.  With 1.2.7.1 a reload shouldn't lose
anything.  Change the register time on the phones to something less that 60
minutes if it's a big problem.  Instead of factory defaulting the phones you
might find a simple restart will re-register the phone and BLF will work on
the phone.

 

Regards

 

lee

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of picciuX
Sent: 24 May 2006 10:49
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] GXP2k and BLF problem

asterisk version? until 1.2.7.1, sip subscriptions get lost on reload of
asterisk. In this case, have to wait until phone re-registers and
re-subscribe for BLFs...

2006/5/24, asterisk <asterisk at zinix.co.uk>: 


Hi,

Is anyone else having problems with the Grandstream GXP2000 BLF? When I
restart * the status lights stop working but the buttons still work as one
touch dials and call the correct number. The only way I cen get the lights 
working again is to reset to factory default and re-build the config.

I am running I upgraded the firmware to 1.1.0.13 but still have the same
problem.

Any ideas ?

Fadge

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit: 
   http://lists.digium.com/mailman/listinfo/asterisk-users


###########################################

This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
For more information, connect to http://www.f-secure.com/

###########################################

This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
For more information, connect to http://www.f-secure.com/

###########################################

This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
For more information, connect to http://www.f-secure.com/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060524/83e14ff8/attachment.htm


More information about the asterisk-users mailing list