[Asterisk-Users] CallerID

C F shmaltz at gmail.com
Tue May 23 09:55:51 MST 2006


It appears that the PBX sitting between Asterisk and your provider is
not passing on the calling pres flags.

On 5/23/06, Lee Archer <lee.archer at pentagon-systems.com> wrote:
> I have a problem with BT in the UK.  Using setcallerpres I can change
> the number shown on the recipents phones to Private or unknown but no
> matter what I set my asterisk cid and callerpres to it still displays
> the base number of my PRI ddi range.
>
> Regards
>
> Lee
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of C F
> Sent: 23 May 2006 15:05
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] CallerID
>
> You should set the presentation flags to private.
> http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+CallingPres
>
> On 5/23/06, Greg Oliver <goliver at cistera.com> wrote:
> > I am trying to set CIDNum to nothing, but my outgoing PRI controlled
> > by another PBX seems to fill in something when asterisk does not..  If
>
> > I set a number either in the sip channel for the phone, or from
> > extensions.con, it is realized..  If I try to leave them blank, or
> > even Not Defined, the main number of the pri gets sent out..
> >
> > I am trying to debug a glitvh in or software and I need to be able to
> > make a test call with unknown (blank callerid)..  I can successfully
> > set it to private, but that is not the same..
> >
> > Any ideas?
> >
> > TIA
> >
> > -Greg
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> ###########################################
>
> This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
> For more information, connect to http://www.f-secure.com/
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>



More information about the asterisk-users mailing list