[Asterisk-Users] Eicon Diva - problems building new v3 melware driver

[Klaus Darilion]

Sorry! Looks like I got confused and forgot to execute make install!

regards
klaus

Klaus Darilion wrote:
> Klaus Darilion wrote:
>> Hi Armin!
>>
>> With the new v3 package compilation works fine. But I still have 
>> problems when starting the config script:
>>
>> 'DIDD' driver load failed. Please check system installation
>> (kernel version, missing files)
>>
>> Do I have to load any modules before? The Eicon Card is found by lspci:
>> 0000:0a:03.0 Network controller: Eicon Networks Corporation Diva 
>> Server 4BRI-8M Rev 2 (rev 01)
>>         Subsystem: Eicon Networks Corporation Diva Server 4BRI-8M Rev 2
>>         Flags: bus master, medium devsel, latency 32, IRQ 77
>>         Memory at fdeffc00 (32-bit, non-prefetchable) [size=256]
>>         I/O ports at cc00 [size=256]
>>         Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
>>         Memory at fdee0000 (32-bit, non-prefetchable) [size=64K]
>>         Capabilities: [40] Power Management version 1
>>         Capabilities: [48] #06 [0080]
>>         Capabilities: [4c] Vital Product Data
> 
> If I manually insert the divadidd module from kernel24 directory
> insmod divadidd.o
> I get another error message:
>  " No Diva adapters were found "
> 
> regards
> klaus
> 
> 
>>
>>
>> regards
>> klaus
>>
>> Armin Schindler wrote:
>>> On Tue, 16 May 2006, Klaus Darilion wrote:
>>>> Tzafrir Cohen wrote:
>>>>> On Tue, May 16, 2006 at 11:05:01AM +0200, Klaus Darilion wrote:
>>>>>> Armin Schindler wrote:
>>>>>>> On Tue, 16 May 2006, Klaus Darilion wrote:
>>>>>>>> Hi Armin!
>>>>>>>>
>>>>>>>> I now tried 2 versions:
>>>>>>>> A) I also executed "make prepare" in the kernel sources
>>>>>>>> before building with
>>>>>>>> "make KDIR=/usr/src/kernel-source-2.6.8"
>>>>>>>>
>>>>>>>> B) I compiled with the kernel headers:
>>>>>>>> "make KDIR=/lib/modules/2.6.8-2-386/build/"
>>>>>>>>
>>>>>>>> Both times I got the same error message (see below). It would
>>>>>>>> be great if you
>>>>>>>> can take a look at it because this Asterisk server should go
>>>>>>>> in production
>>>>>>>> today.
>>>>>>> What kernel is that? When I use the plain kernel 2.6.8 from
>>>>>>> kernel.org I don't even get any warning.
>>>>>>> Either the kernel headers are incomplete or this distribution
>>>>>>> kernel is incompatible in some way. Can you provide a tgz of
>>>>>>> these sources(headers) directory to me?
>>>>>> I think I found the problem:
>>>>>>
>>>>>> "make KDIR=/lib/modules/2.6.8-2-386/build/" fails as
>>>>>> /lib/modules/2.6.8-2-386/build/ links to
>>>>>> /usr/src/kernel-headers-2.6.8-2-386
>>>>>>
>>>>>> Wheres when setting KDIR to /usr/src/kernel-headers-2.6.8-2 (note:
>>>>>> note adding the -386) then the compilation works fine.
>>>>>>
>>>>>> Maybe we need a Debian expert: What is the difference between
>>>>>> kernel-headers-2.6.8-2 and kernel-headers-2.6.8-2-386 ???
>>>>>>
>>>>>> Does the compiled 2.6.8-2 works with my 2.6.8-2-386 kernel?
>>>>> kernel-headers-2.6.8-2 is a large architecture-independent package 
>>>>> that
>>>>> contains most of what is needed from the kernel source to build 
>>>>> external
>>>>> modules and such.
>>>>>
>>>>> 2.6.8-2-386 , -686, -686-smp, and all others contain the little
>>>>> configuration-specific files . /usr/src/kernel-headers-2.6.8-2-386 has
>>>>> many symlinks to files under /usr/src/kernel-headers-2.6.8-2 .
>>>>> /usr/src/kernel-headers-2.6.8-2 in itself does not contain a 
>>>>> "configured
>>>>> source" or even a .config file.
>>>> It does:
>>>> ll /usr/src/kernel-headers-2.6.8-2/.config
>>>> -rw-r--r--  1 root root 27535 2005-08-16 17:12
>>>> /usr/src/kernel-headers-2.6.8-2/.config
>>>>
>>>> The question is: can it be used to build modules for 2.6.8-2-386 ?
>>>
>>> I don't think so. It contains a different .config, which might not be 
>>> compatible with the running kernel.
>>>
>>> I have made a few fixes to build with the debian header packages. The 
>>> new package (3.0.f) will be available for download in about 30 Minutes.
>>>
>>> I have tested build with
>>>   make KDIR=/usr/src/kernel-headers-2.4.27-2-386
>>> and
>>>   make KDIR=/usr/src/kernel-headers-2.6.8-2-386
>>>
>>>
>>> Armin
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>>
>>> Asterisk-Users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> Asterisk-Users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users