[Asterisk-Users] Problems with TDM400P and FXO modules

[Bogdan Tocu]

Hi , I have an asterix (1.2.7.1) box with 3 TDM400P and 10 FXO modules, and
zaptel (1.2.5).
The problem is that 6 modules can't be initaized and i get the folowing
error:

May  7 09:17:37 WARNING[7739] chan_zap.c: Unable to specify channel 9: No
such device
May  7 09:17:37 ERROR[7739] chan_zap.c: Unable to open channel 9: No such
device
here = 0, tmp->channel = 9, channel = 9

ztcfg output is:

Zaptel Configuration
======================


Channel map:

Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Slaves: 05)
Channel 06: FXS Kewlstart (Default) (Slaves: 06)
Channel 07: FXS Kewlstart (Default) (Slaves: 07)
Channel 08: FXS Kewlstart (Default) (Slaves: 08)
Channel 09: FXS Kewlstart (Default) (Slaves: 09)
Channel 10: FXS Kewlstart (Default) (Slaves: 10)
Channel 11: FXS Kewlstart (Default) (Slaves: 11)
Channel 12: FXS Kewlstart (Default) (Slaves: 12)

10 channels configured.

Details about the cards:

Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.2.5 Echo Canceller: KB1
ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 22 (level, low) -> IRQ 201
Freshmaker version: 71
Freshmaker passed register test
Module 0: Installed -- AUTO FXO (FCC mode)
Module 1: Installed -- AUTO FXO (FCC mode)
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
ACPI: PCI interrupt 0000:03:02.0[A] -> GSI 17 (level, low) -> IRQ 193
Freshmaker version: 71
Freshmaker passed register test
Module 0: Installed -- AUTO FXO (FCC mode)
Module 1: Installed -- AUTO FXO (FCC mode)
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
ACPI: PCI interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 177
Freshmaker version: 71
Freshmaker passed register test
Module 0: Not installed
Module 1: Not installed
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV E/F (2 modules)
Registered tone zone 0 (United States / North America)

zaptel.conf:

fxsks=3-12
loadzone=us
defaultzone=us

zapata.conf:

channel => 4-8
context=inc_ctx
callerid=asreceived
busydetect=yes
busycount=8

....

The modules 4-8 are the only ones that work properly ...?

How could i solve this problem?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060509/df83f2b2/attachment.htm