[Asterisk-Users] Sip show inuse

[William Piper]

Actually, I take that back... It still isn't working. It does show the users
& peers now, but they stay at 0. 

I set this on our SIP carrier & made both an incoming and outbound call...
it still showed 0 during the call.

Any other ideas?

Thanks,

bp

-----Original Message-----
From: William Piper [mailto:billy at kersting.com] 
Sent: Tuesday, May 02, 2006 12:49 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Sip show inuse

It does work now... thanks. 

<annoyed>
I guess I need to add that line to all sip users if I want to monitor who is
on the phone and who isn't.
</annoyed>

Thanks again,
bp

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Aaron Daniel
Sent: Tuesday, May 02, 2006 12:27 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Sip show inuse

Not sure if this helps any, but I had no clue what "sip show inuse" would 
show until I found out you had to put incominglimit (or call-limit) in 
sip.conf/realtime for it to know that the phone was in use... Not sure if 
this'll help.

On Tue, 2 May 2006, Alexander Lopez wrote:

> I was about to post a bug, It hasn't worked for me since CVS 11/01/05!!!
>
>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
>> bounces at lists.digium.com] On Behalf Of William Piper
>> Sent: Tuesday, May 02, 2006 11:17 AM
>> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
>> Subject: [Asterisk-Users] Sip show inuse
>>
>> I have recently upgraded to 1.2.7.1 from 1.2.4.
>> I can no longer use "sip show inuse".
>>
>> Below is the output... I know there are current calls:
>> redhat*CLI> sip show inuse
>> * User name               In use          Limit
>> * Peer name               In use          Limit
>>
>> Does anyone have an idea why this isn't working?
>>
>> Thanks,
>> bp
>>