[Asterisk-Users] Re: BRI cards, HFC, and bristuff - a generalquestionto clear up my understanding.

[David Hajek]

Thanks.

 

I think our problem ca be similar. Have you tried to call from analog phone #1 to another analog phone #2? It works. But when you try

to call vice versa from #2 to #1 it does not work. When you restart asterisk it works again - but only one direction. 

 

-David

________________________________

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Filip Drągowski
Sent: Friday, March 31, 2006 1:40 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Re: BRI cards, HFC, and bristuff - a generalquestionto clear up my understanding.

 

Asterisk 1.2.4 + bristuff-0.3.0-PRE-1l + libpri-1.2.2 +  zapte-1.2.3 + 
*CLI> zap show status
Description                              Alarms     IRQ        bpviol     CRC4
quadBRI PCI ISDN Card 1 Span 1 [TE] (caˇ OK         0          0          0
quadBRI PCI ISDN Card 1 Span 2 [TE] (caˇ OK         0          0          0
quadBRI PCI ISDN Card 1 Span 3 [TE] (caˇ OK         0          0          0
quadBRI PCI ISDN Card 1 Span 4 [TE] (caˇ OK         0          0          0
Wildcard TDM400P REV E/F Board 1         OK         0          0          0
and it seems to work. Only sip phones connected to *PBX (by gateways or ethernet)
as i remember installation process:
1. bristuff patching asterisk/libpri/zaptel 
2. libpri/zaptel/asterisk install
3. zaptel/quozap/wctdm modules installation
Runs on Debian 3.1. kernel 2.6.15.4

but i have problem: when SIP hardphone hangup connection (SIP/ <-> Zap/)
asterisk don't send Q.931 DISCONNECT message, and i don't have any idea how to fight with that.

Filip D.






Does anyone test Asterisk 1.2.X + bristuff-0.3.X and TDM card? We can't
get it to work.
 
-David
 
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Julian J.
M.
Sent: Friday, March 31, 2006 1:44 AM
To: Chris Earle; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Re: BRI cards, HFC,and bristuff - a
general questionto clear up my understanding.
 
I have 2 different instalations with 1 Billion HFC Card (1port), and 1
TDM400. Asterisk 1.0.10+bristuff+florz patch.
 
Only issue is that you must load all modules (wcfxs, zaphfc) before
runing ztcfg, otherwise nothing works.
 
Everything works ok, even faxing.
 
Julian.
 
On 3/30/06, Chris Earle <cearle at cbltech.ca> <mailto:cearle at cbltech.ca>  wrote:
  

	What?  After hours of searching for anything to help me, I found this
	comment about zaptel cards in systems with bristuff-cards (junghanns
	    

for me
  

	in this case)
	 
	I havent' seen any other reports of this sort of behaviour --- can
	    

anyone
  

	confirm whether they've got a QuadBRI and TDM400P card working
	    

together in
  

	one machine?
	 
	 
	thanks :-S
	 
	 
	 
	"Zoa" <zoachien at securax.org> <mailto:zoachien at securax.org>  wrote in message
	news:4370F2BE.3090507 at securax.org...
	    
	<snip>
	    

		We stopped with the bristuff as bristuff will break any other zaptel
		cards in the same system. (pri seems logical, why the tdm card also
		broke is unknown to me).
		      

	<snip>
	    

		_______________________________________________
		--Bandwidth and Colocation sponsored by Easynews.com --
		 
		Asterisk-Users mailing list
		Asterisk-Users at lists.digium.com
		http://lists.digium.com/mailman/listinfo/asterisk-users
		To UNSUBSCRIBE or update options visit:
		   http://lists.digium.com/mailman/listinfo/asterisk-users
		      

	 
	 
	_______________________________________________
	--Bandwidth and Colocation provided by Easynews.com --
	 
	Asterisk-Users mailing list
	To UNSUBSCRIBE or update options visit:
	   http://lists.digium.com/mailman/listinfo/asterisk-users
	 
	    

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
 
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
 
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
 
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
 
  






--
___________________________________
Filip Drągowski
Mobile: +48(0)500 054045
E-mail: F.Dragowski at ontp.net
___________________________________
ONTP.NET Tomasz Karczewski
Aleja Wojska Polskiego 33 pokoj 122
65-077 Zielona Góra, Poland
Mobile: +48(0)501 653395
Office: +48(0)68 4141018
Fax:    +48(0)68 4141017
http://www.ontp.net
___________________________________


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060331/4545a8c2/attachment.htm