[Asterisk-Users] Span monitoring

[Johann]

You could have something parse the output of /proc/zaptel/1 (depending on which 
card you have you may have additional files there).  If there is an alarm it 
should be displayed there.  This assumes you are using zaptel though.

--johann

Kevin P. Fleming wrote:
> Wai Wu wrote:
> 
> 
>>Does Asterisk have builtin (T1 or E1) span monitoring? If a span goes
>>down, will asterisk know about it. Personally, I would like to have a
>>event generated through the Manager API interface.
> 
> 
> Have you actually tried this? It takes all of about 10 seconds to answer
> this question yourself... In any case, yes, Asterisk will know that all
> the B channels went into alarm, and if a PRI is in use on that span,
> that the D channel also went into alarm. It does not have a concept of a
> 'span' though.
> 
> I don't believe there is currently an AMI event generated for Zap
> channel alarms, but it would certainly be trivial to add one.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>