[Asterisk-Users] Re: Cisco 7970

[jason justman]

Yes, my mistake in /tftpboot/SEP<MAC>.cnf.xml.  Having said that, Please 
double check that you have set the line:

permit=192.168.1.90/255.255.255.255     ; This device can register only 
using this ip address

or in your case:

permit=10.0.0.175 /255.255.255.255     ; This device can register only 
using this ip address

in the /etc/asterisk/sccp.conf.

The TFTP errors are related to automatically updating firmware, custom 
ringtones, and what I believe is SCCP encryption support which is not 
necessary. 

J


Tomislav Parčina wrote:
> In article <44242D99.6090101 at jasonjustman.com>, jason at jasonjustman.com says...
>   
>> Best bet is to get "Asterisk Chan_Sccp" http://chan-sccp.berlios.de/
>>
>> 1.) setup your /etc/asterisk/sccp.conf with something like:
>>
>> 2.)  setup lines 30/31 as a custom extension in astersik (i used amp) 
>> and had it dial SCCP/30 and SCCP/31 as needed
>>
>> 3.)  setup /tftpboot config for SEP<MAC>.xml
>>     
>
> First thank you for your mail and instructions that you have provide to me.
> Now, I have done everything you said except and 3.) file name isn't SEP<MAC>.xml but SEP<MAC>.cnf.xml
>
> When Cisco 7970 boots up it looks for this on tftp.
>
> 27.3.2006 15:24 :TFTP Error from 10.0.0.175 requesting CTLSEP0016C87754CE.tlv : File does not exist
> 27.3.2006 15:24 :Sending SEP0016C87754CE.cnf.xml to  (10.0.0.175)
> 27.3.2006 15:24 :Sent SEP0016C87754CE.cnf.xml to  (10.0.0.175), 2312 bytes
> 27.3.2006 15:24 :TFTP Error from 10.0.0.175 requesting loads : File does not exist
> 27.3.2006 15:24 :TFTP Error from 10.0.0.175 requesting td-sccp.jar : File does not exist
> 27.3.2006 15:24 :TFTP Error from 10.0.0.175 requesting g3-tones.xml : File does not exist
>
> 7970 had this firmware version:
> Load File: TERM70.DEFAULT
> App Load ID: Jar70.2-9-1-45.sbn
> JVM Load ID: CVM70.2-0-1-45.sbn
> OS Load ID: cnu70.2-7-5-50.sbn
> Boot Load ID: 7970_64060118.bin
>
> The problem is that 7970 never registers to *. I have entered asterisk IP address at 2 places in SEP<MAC>.cnf.xml.
>
> *CLI> show channeltypes
> Type        Description                    Devicestate  Indications  Transfer
> ----------  -----------                    -----------  -----------  --------
> MGCP        Media Gateway Control Protocol no           yes          no
> SIP         Session Initiation Protocol (S yes          yes          yes
> Feature     Feature Proxy Channel Driver   no           yes          no
> Agent       Call Agent Proxy Channel       yes          yes          no
> Phone       Standard Linux Telephony API D no           no           no
> Zap         Zapata Telephony Driver        no           yes          no
> Local       Local Proxy Channel Driver     no           yes          no
> IAX2        Inter Asterisk eXchange Driver yes          yes          yes
> SCCP        Skinny Client Control Protocol yes          yes          no
>
> Seams that SCCP is installed correctly. But phone never registers (on lover left corner of 7970 I have circle/clock and word Registering).
>
> *CLI> sccp show devicestypes
> NAME             ADDRESS         MAC              Reg. State
> ================ =============== ================ ==========
> *CLI>
>
> Have I done something wrong?
>
>
> --
> Tomislav Parcina
> tparcina#lama.hr
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>