[Asterisk-Users] help on mfc/r2

Melcon Moraes levelz at terra.com.br
Sun Mar 26 17:16:41 MST 2006


Now we're talking. :)

I don't know anythig about Alcatel boxes, but can you make a simple call
to your regular phone number from some SIP/IAX2 softphone/hardphone?

What do you have in zaptel.conf file? For instance, I have this on my:

span=1,1,0,cas,hdb3
cas=1-15:1101
cas=17-31:1101

And those bits after the channel range sets the state of each channel. I
don't know if they are the same for your box but, blocked has something
to do with that. What happens if you use Unicall/g1 instead of just
channel 1 of Unicall?

Do you have zttool compiled? How those bits are showed up? The timing
source is correctly set up? Seems that your master timing sync source is
the Alcatel, so you should use "span=1,1,0"

It looks like I'm filling you with more questions than answers. :)

[]'s
MM


 -----Original Message-----
From:   Krzysztof Drewicz <drewicz at citicom.pl>
To:     Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com>
Cc:     
Sent:  Mon, 27 Mar 2006 01:01:12 +0200
Delivered:  Sun,  26 Mar 2006 16:59:27 
Subject:[Asterisk-Users] help on mfc/r2

Melcon Moraes napisał(a):

>"supertones=pl" inside your unicall.conf
>
Ok, done.

>
>something missing, isn't? What are you trying to do? 
>
Maybe that will be better (thz Marcin):
# cat call
Channel: Unicall/1/363
Application: playback
Data: demo-thanks

klaudia*CLI> !cp call /var/spool/asterisk/outgoing
-- Attempting call on Unicall/1/363 for application 
playback(demo-thanks) (Retry 1)
Mar 26 23:49:32 WARNING[13415]: chan_unicall.c:634 unicall_report: 
MFC/R2 UniCall/1 Call control(1)
Mar 26 23:49:32 WARNING[13415]: chan_unicall.c:634 unicall_report: 
MFC/R2 UniCall/1 Make call
Mar 26 23:49:32 WARNING[13415]: chan_unicall.c:1084 unicall_call: Make 
call failed - Blocked
Mar 26 23:49:32 NOTICE[13415]: channel.c:2435 __ast_request_and_dial: 
Unable to call channel Unicall/1/363
Mar 26 23:49:32 WARNING[13415]: chan_unicall.c:634 unicall_report: 
MFC/R2 UniCall/1 Channel gains
Mar 26 23:49:32 WARNING[13415]: chan_unicall.c:634 unicall_report: 
MFC/R2 UniCall/1 Channel switching
-- Hungup 'UniCall/1-1'
Mar 26 23:49:32 NOTICE[13415]: pbx_spool.c:269 attempt_thread: Call 
failed to go through, reason 0

363 is my regular phone number inside company.

>
>If you give me a little more info, I promise I'll try to help you. :)
>

I use PCM R/2 in Alcatel OXE. (On Big Alcatel 4400, aka The Crystal, aka 
"ACT" it would be called PCM2).
on the OXE side PCM/R2 is configured like that:

┌─Consult/Modify: Board──────────────────────────────────────────────┐
│ │
│ Node Number (reserved) : 102 │
│ Shelf Address : 1 │
│ Board Address : 4 │
│ │
│ Interface Type + MG-IVR Z30 │
│ Virtual board + NO │
│ Serial number : -------------- │
│ Usage State + Busy │
│ Operational State + Enabled │
│ Main/Standby State + Main (Master) │
│ Number Of Sets Being Connect. : 30 │
│ Country Protocol Type + Poland │
│ Send Init Dynamic Msg + False │
│ Param By Default + False │
│ Incidents Teleservice + NO │
│ IVR Protocol + OPS-FX Protocol │
│ Network recording use + False │
│ │
└────────────────────────────────────────────────────────────────────┘


-- 
Krzysztof Drewicz
<drewicz at citicom.pl>
+48 22 34 54 363


E-mail classificado pelo Identificador de Spam Inteligente Terra.
Para alterar a categoria classificada, visite
http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=levelz&_l=1,1143413967.899910.29065.alcuta.terra.com.br,6811,Des15,Des15

 --Original Message Ends--

-- 
Melcon Moraes <melcon.moraes at terra.com.br>




More information about the asterisk-users mailing list