[Asterisk-Users] welltech Wellgate 3804 in SIP mode

Martin Joseph ast at stillnewt.org
Sat Mar 25 21:12:58 MST 2006


On Mar 25, 2006, at 6:26 PM, Erick Perez wrote:

> Martin,  i guess im in dumb mode today because i don't get what you  
> say, may also be because this will be my first welltech to configure.
> what im trying to do is:
Sorry, I don't know if the 3804 actually uses a similar config setup to  
my 3701a, so it might not be you at all.
>
> remote_voip_gateway-------->asterisk----------->fox/fxs/ 
> and_international_voip_providers
> call will always go -----> this way, no incoming calls from the right  
> of the diagram side to asterisk.

Ok,  then if it is similar to mine, all you need to do is set the SIP  
configuration screen for the wellgate. Look under "SIP Config" and  
"security config".  Then to dial,  you just use (repeated from below):

For outbound ones, I think I just have a regular old
Dial(SIP/${EXTEN}@2003} in my dialplan where 2003 is the FXO port.

Good Luck,
Marty

PS I had to reflash my device with the SIP formware, as it arrived with  
H323 firmware.


>
>
>
> On 3/23/06, Martin Joseph < ast at stillnewt.org> wrote:
>> On Mar 22, 2006, at 10:24 PM, Erick Perez wrote:
>>
>> > Hi, does anybody have a working config or tips to connect the  
>> welltech
>> > wellgate 3804 (4fxo) unit to asterisk via SIP ?
>> > I think I register it via SIP with my * box, but when sending calls
>> > from * to the wellgate the unit does not pass the call to any of the
>> > fxo ports.
>> >
>>
>> I am using the 3701a, which is a 1 FXO 1 FXS deal.
>>
>> The trick for me was the "routing table"  or something like that from
>> the Web based configuration screen.  There I changed the default for
>> the FXO to point to IP, and the IP to default to the FXO.
>>
>> Then I also have the "line configuration" set so the extension I want
>> to ring ie 2020 is the "hotline" for the FXO.
>>
>> For outbound ones, I think I just have a regular old
>> Dial(SIP/${EXTEN}@2003} in my dialplan where 2003 is the FXO port.
>>
>> HTH?
>> Marty
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> Asterisk-Users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> -- 
>
> -------------------------------------------
> Erick Perez
> Linux User 376588
> http://counter.li.org/  (Get counted!!!)
> Panama, Republic of Panama
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 2777 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060325/c44409aa/attachment.bin


More information about the asterisk-users mailing list