[Asterisk-Users] G729 codec problems

[Gabriel Afana]

Type "show g729" in the CLI.  It should show something like this:

0/0 encoders/decoders of 1 licensed channels are currently in use

This will show you how many licensed channels you have and how many are in
use.  This might give you a starting point to figure out your problem.

- Gabe


----- Original Message ----- 
From: "Rudolf Ladyzhenskii" <rumatech at gmail.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Saturday, March 25, 2006 4:18 PM
Subject: [Asterisk-Users] G729 codec problems


Hi, all

I have a license for G.729A codec from Digium.

When asterisk starts it shows:
Jun 17 21:13:59 NOTICE[4040]: codec_g729.c:460 load_module: G.729
transcoding module Copyright (C) 1999-2005 Digium, Inc.
Jun 17 21:13:59 NOTICE[4040]: codec_g729.c:461 load_module: This
module is supplied under a commercial license granted by Digium, Inc.
Jun 17 21:13:59 NOTICE[4040]: codec_g729.c:462 load_module: Please see
the full license text supplied by the accompanying
Jun 17 21:13:59 NOTICE[4040]: codec_g729.c:463 load_module: "register"
utility, or ask for a copy from Digium.
  == G.729 Host-ID:
cc:20:a3:86:01:93:53:92:2c:37:ae:e7:ad:16:6e:f0:39:f6:88:4e
  == Found license 'G729-190B962C' providing 1 channels
  == Found total of 1 G.729 licenses
  == Registered translator 'g729tolin' from format g729 to slin, cost 20
  == Registered translator 'lintog729' from format slin to g729, cost 115


All is fine, however when trying to make a call I am getting:
WARNING[4063]: codec_g729.c:170 g729tolin_framein: Out of G.729
Decoder Licenses!

No other calls are active.

Any ideas what is going on?

Thanks,
Rudolf
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users