[Asterisk-Users] Realtime SIP Persistency

[Douglas Garstang]

I do have rtcachefriends=yes in sip.conf, and my astdb file is full of sip contacts.
That's not the problem.

> -----Original Message-----
> From: Barry Flanagan [mailto:barryf-lists at flanagan.ie]
> Sent: Tuesday, March 21, 2006 12:12 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Realtime SIP Persistency
> 
> 
> Douglas Garstang wrote:
> > I've been using realtime for sip users information.
> > 
> > I noticed that when you are doing this, if you do a 
> 'reload' or restart asterisk, the information in a 'sip show 
> peers' goes away. When I do this, MWI stops working. I always 
> though MWI used the astdb file ('database show') to determine 
> where to send MWI but it must be using 'sip show peers' 
> because when this is cleared, it stops working. 
> > 
> > When I stop using realtime and instead provision users in 
> sip.conf, a reload or restart DOES NOT clear 'sip show 
> peers'. It must be populating this list from the astdb file 
> in that case.
> > 
> > I'm going to scoot over to bugs.digium.com and report this 
> as a bug, because this is a real show stopper, and completely 
> nullifies Realtime's use for us.
> > 
> 
> Doug,
> 
> I think this is documented behaviour. With realtime the peers do not
> show up under sip show peers, and MWI does not happen. I 
> think though if
> you use rtcachefriends=yes in your [general] section of 
> sip.conf that it
> will work as you desire.
> 
> Hope this helps.
> 
> -- 
> 
> -Barry Flanagan
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>