[Asterisk-Users] ISDN Protocol Unknom Error with Junghanns OctoBRI

[Dave Cotton]

On Mon, 2006-03-20 at 11:51 +0100, Sébastien Mortier wrote:
> Hello,
> 
> I recently bought a Junghanns Octobri Card. I have some problems with 
> this card to make outbound calls but I can receive calls.
> 
> I have 3 lines to PSTN and 3 lines to my existing PBX
> 
>    FRANCE TELECOM <-- OctoBRI --> Asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1h 
> <-- OctoBRI --> PABX e-Generis <----> ISDN Phones
>                                            |
>                                            |
>                                       SIP Phones
> 
> 
> France Telecom --> SIP Phones : Works
> France Telecom --> ISDN Phones : Works
> SIP Phones ------> ISDN Phones : Works
> ISDN Phones -----> SIP Phones : Works
> SIP Phones ------> France Telecom : DOESN'T WORK
> ISDN Phones -----> France Telecom : DOESN'T WORK
> 
> 
> zaptel.conf
> -----------
> 
> 
> loadzone=fr
> defaultzone=fr
> # qozap span definitions
> # most of the values should be bogus because we are not really zaptel
> span=1,1,3,ccs,ami
> span=2,0,3,ccs,ami
> span=3,0,3,ccs,ami
> span=4,0,3,ccs,ami
> span=5,1,3,ccs,ami
> span=6,0,3,ccs,ami
> span=7,0,3,ccs,ami
> span=8,0,3,ccs,ami
> 

I was going mad with a Quadbri until I changed ccs,ami to ccs,hdb3 and
it's been running 6 months now.

-- 
Dave Cotton <dcotton at linuxautrement.com>