[Asterisk-Users] Unable to forward frame

[Andy Kuo]

Hi,

I think there should be only one timing source, but you have 3 here...

Zaptel.conf
span=1,1,0,ccs,hdb3,crc4

span=2,0,0,ccs,hdb3,crc4

span=3,0,0,ccs,hdb3,crc4

span=4,0,0,ccs,hdb3,crc4

Not sure if this is causing the problem though.

Andy


On 3/15/06, James Sturges <thinking at 1am.com.au> wrote:
> Hi,
>
> I get this error in the log file when I call from my mobile to the Asterisk
> server, but hang up the mobile before anyone picks up.
>
> Normally I would not worry about it, but I have been having some bad
> experiences (only recently, after about 9 months of good operation) with
> asterisk, although there have been related issues with Telco lines /
> equipment and also some Asterisk initiated CRC errors after upgrading to
> 1.2.  So I have downgraded to 1.0.9.
>
> So I can isolate everything I have just installed a VERY VERY simple dial
> plan.
>
> The setup is
>
> Telco <---> TDM 4 Port BRI <---> Ericsspn BP250
>
> Extensions.conf (all of it!!!!)
>
> [default]
> exten => s,1,Dial(ZAP/g4/1111211,45,t)
>
> [dialstring]
>
> exten => i,1,Playback(invalid)
> exten => i,2,Hangup
> exten => t,1,Hangup
>
> [te405p-frombp250]
>
> exten => _3XX,1,Answer
> exten => _3XX,2,Dial(Sip/${EXTEN},6000,t)
> exten => _3XX,3,Hangup
>
> exten => _X.,1,Answer
> exten => _X.,2,Dial(Zap/g1/${EXTEN},6000,t)
> exten => _X.,3,Hangup
>
> [te405p-intelstra]
>
> exten => _X.,1,Answer
> exten => _X.,2,Dial(Zap/g4/${EXTEN},6000,t)
> exten => _X.,3,Hangup
>
> [from-sip]
>
> exten => s,1,Dial(SIP/3332,45,t)
>
> exten => _0X.,1,Answer
> exten => _0X.,2,Dial(Zap/g1/${EXTEN:1},6000,t)
> exten => _0X.,3,Hangup
>
> exten => _X.,1,Answer
> exten => _X.,2,Dial(Zap/g4/1111${EXTEN},6000,t)
> exten => _X.,3,Hangup
>
> Zapata.conf
> [channels]
> context=default
> musiconhold=default
> switchtype=euroisdn
> usecallerid=yes
> cidsignalling=v23
> cidstart=polarity
> hidecallerid=no
> callwaiting=no
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> echotraining=800
> rxgain=0.0
> txgain=0.0
>
> group=1
> context=te405p-intelstra
> ;context=te405p-ext
> pridialplan=local
> signalling=pri_cpe
> ;overlapdial=yes
> callerid=asreceived
> channel=>1-15, 17-31
> ;channel=>32-46, 48-62
>
> group=4
> context=te405p-frombp250
> ;context=te405p-in
> pridialplan=local
> signalling=pri_net
> overlapdial=yes
> callerid=asreceived
> channel=>94-108, 110-124
> ;channel=>32-46, 48-62
>
>
> Zaptel.conf
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-15
> dchan=16
> bchan=17-31
> span=2,0,0,ccs,hdb3,crc4
> bchan=32-46
> dchan=47
> bchan=48-62
> span=3,0,0,ccs,hdb3,crc4
> bchan=63-77
> dchan=78
> bchan=79-93
> span=4,0,0,ccs,hdb3,crc4
> bchan=94-108
> dchan=109
> bchan=110-124
>
> loadzone=au
> defaultzone=au
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>