[Asterisk-Users] Bad FXS Module?

[Rich Adamson]

Best bet... call digium support. The module should be under warranty 
(two years), and they will be able to tell you how to test if the notes
below aren't already enough.


Jimmy wrote:
> I apparently have a dead FXS module.  Is there any kind of test I can 
> run on it (on a live system) to determine if its good or bad?  The 
> telephone has no dialtone, gets no calls. It has been working for 
> several months, and just quit yesterday. Thanks!
> 
> Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules)
> Freshmaker version: 73
> Freshmaker passed register test
> Module 0: Installed -- AUTO FXS/DPO
> Module 1: Installed -- AUTO FXS/DPO
> ProSLIC on module 2 failed to powerup within 510 ms (0 mV only)
> 
>  -- DID YOU REMEMBER TO PLUG IN THE HD POWER CABLE TO THE TDM400P??
> Unable to do INITIAL ProSLIC powerup on module 2
> ProSLIC on module 2 failed to powerup within 510 ms (0 mV only)
> 
>  -- DID YOU REMEMBER TO PLUG IN THE HD POWER CABLE TO THE TDM400P??
> Unable to do INITIAL ProSLIC powerup on module 2
> Module 2: FAILED FXS (FCC)
> Module 3: Installed -- AUTO FXS/DPO
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users