[Asterisk-Users] Oh this is bad.... bindaddr and rtp traffic

C F shmaltz at gmail.com
Tue Mar 7 16:49:59 MST 2006


Right, Avaya can do that. Use Avaya.

On 3/7/06, Douglas Garstang <dgarstang at oneeighty.com> wrote:
> Pardon my candour, but for a product Digium calls 'enterprise grade' it sure seems to be missing a few features.
>
> -----Original Message-----
> From: Alexander Lopez [mailto:Alex.Lopez at OpSys.com]
> Sent: Tuesday, March 07, 2006 9:39 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] Oh this is bad.... bindaddr and rtp
> traffic
>
>
> Asterisk does not like multiple interfaces in the way you are configured. You can either:
>
> A) use the bindaddr in the sip.conf to limit where the packsge come and go.
>
> B) use an outside traffic manager
>
> Look up the archives, kpf explained why this would not work, as asterisk can't do load balancing at this time
>
>
> -----Original Message-----
> From: "Robert Webb" <asterisk at ropeguru.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
> Sent: 3/7/06 11:27 AM
> Subject: Re: [Asterisk-Users] Oh this is bad.... bindaddr and rtp traffic
>
>
> On Tue, 7 Mar 2006 09:12:25 -0700
>   "Douglas Garstang" <dgarstang at oneeighty.com> wrote:
> > I have a configuration where RTP traffic is going out
> >interface pub0, and coming back into through pub1.
> > I have bindaddr=0.0.0.0 in sip.conf, and a netstat -an
> >shows:
> >
> > udp        0    788 0.0.0.0:5060            0.0.0.0:*
> >
> > which means that Asterisk is listening on all addresses
> >(on all interfaces?).
> >
> > Anyway, when the RTP traffic comes back in on interface
> >pub0, Asterisk does nothing with it. A 'rtp debug' shows
> >it's receiving the RTP packets, it just seems it does
> >nothing with them.
> >
> > Anyone seen this?
> >
> > Doug.
> >
> >
>
> I thought all RTP was controlled through rtp.conf and only
> the SIP traffic was controlled through SIP.conf. I am not
> sure what settings, beside the RTP port range, you can out
> into the rtp.conf though.
>
> Robert
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>



More information about the asterisk-users mailing list