[Asterisk-Users] incoming calls dropout on PRI over TE110p

[pdhales at optusnet.com.au]

Just trying to think - are you using the standard E1 setup from ATP?

I have found that the settings on their website work pretty well.....

Also - have you tried to put an answer in your dialplan? That might keep the
dialplan open..

later,

PaulH

----- Original Message ----- 
From: "Paul C" <paulc at mail4u.com.au>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Wednesday, March 01, 2006 5:15 PM
Subject: Re: [Asterisk-Users] incoming calls dropout on PRI over TE110p


> > Paul C wrote:
> >> I am running Asterisk 1.0.9 and have been running all my calls through
a
> >> VSP over a IAX2 trunk however we have recently purchased and connected
a
> >> TE110p to a PRI ( E1 with 16 voice channels ) through Optus.   I can
make
> >> outgoing calls via it fine, however incoming calls are dropped after a
> >> few seconds ( or as soon as a command like Playback, or the call is
> >> picked up if forwarded to a SIP extensions ).
>
> >> SNIP <<
>
> >
> > overlapdial should usually be no in my experience.
>
>
> Okay I've turned that to no with no change.  I've just got off the phone
to
> Optus and apparently they had a client in melbourne last week and they
fixed
> the problem by turning crc checking off at the optus end.  I don't suppose
> that was anybody on here ?
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>