[Asterisk-Users] Polycom 501

[Anton Krall]

For the hash issue, you need to modify your dialplan on sip.cfg or
*-phone.cfg and tell it to dial anything you want and use X number of
waiting seconds to start dialing, for example:
 
dialplan.impossibleMatchHandling="3"
 
here Im telling the phone that if no match is found on the dialplan (the
phone, not asterisk), then dial it in 3 seconds without having to press #
 
I also use
 
 dialplan.digitmap="x.T" 
 
so that it will dial anything I want and let asterisk deal with it on its
own dialplan terms, if you dont us this, then you need to enter something
like XXXXXX which will let you dial X numbers and the phone tries to match
the numbers entered before passing the call to asterisk. 
 
Best bet, use x.T which means, let me dial what I want damn it :)
 
Hope this helps.
 
All settings mentioned go either in sip.cfg (for all phones) or
MAC-phone.cfg for a particular phone.


  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of MBIT
Technologies
Sent: Thursday, March 02, 2006 5:34 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Polycom 501



I guess it doesn't work by default on my phone. You still need to press hash
to transfer calls. The transfer button doesn't work. Where do I set it?

 

 

Regards

 

 

Mark Brooker

T: 02 4959 8670

M: 0415 846 865

F: 02 9882 0947

E: mark at mbit.com.au

W: http://www.mbit.com.au

 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Anton Krall
Sent: Thursday, 2 March 2006 3:47 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Polycom 501

 

Those buyttons do work with asterisk by default... what kind of problems are
you having?

 


  _____  


From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of MBIT
Technologies
Sent: Wednesday, March 01, 2006 7:56 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] Polycom 501

Hi Guys

 

Just a quick question regarding on the 501, has anyone been able to
configure the transfer button and messaging buttons to work with asterisk?

 

Can you share a configuration to do this?

 

Thanks in advance.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060302/a50d972d/attachment.htm