[Asterisk-Users] Avaya 4610sw SIP setup problem

Thu Jun 29 12:15:54 MST 2006

Did you try to manually to change the parameters of the phone?   When you
power the phone up then are you able to enter manually the parameter when
you hit *.   I am using a 4610 with Release 2.2 but I am not using the
capability to upload the settings from the server.

Henk

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Herchi Silviu
Sent: donderdag 29 juni 2006 15:55
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Avaya 4610sw SIP setup problem

I just tried serving the files off Apache, port 80, no change... Most
parameters are taken into account by the phone, except for SIP proxy and SIP
registrar...

Coud someone post an excerpt from their 46xxsettings.txt where I could see
the format they use?

Thank you in advance,

Silviu

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tom Lynn
Sent: 29 June 2006 00:33
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Avaya 4610sw SIP setup problem

I too am using 2.2.2, but I'm loading my config files via HTTP.  I was
having some difficulty when I was using TFTP.  Things were not as reliable
for me, so I switched to HTTP.  I've been stable since.  

On 6/28/06, Herchi Silviu <Silviu.Herchi at arcelor.com> wrote: 

Hi Tom,

Thank you for your interest in my problem, I really am desperate about this
thing...

I have tried several versions one after another, and now I'm using the one
released on 04.07.2006 (SIP release 2.2.2).

Thanks,

Silviu

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tom Lynn
Sent: 28 June 2006 05:35
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Avaya 4610sw SIP setup problem

Which version of firmware are you using?

On 6/27/06, Herchi Silviu <Silviu.Herchi at arcelor.com> wrote: 

Hi all, 

I've been pulling my hair out for two days over this problem. I did *a lot*
of Googling around, I searched the list archives to no avail - no one has
the same problem! 

I have two Avaya 4610sw phones. I installed the latest SIP firmware using
the TFTP server. So far everything looks good. Each time the phone boots, it
retrieves the 46xxsettings.txt from the TFTP server. My problem is that the
SIP PROXY, SIP DOMAIN and SIP REGISTRAR are simply ignored. The phone does
take into account other values (WEB PROXY, etc), but it keps displaying
"Registering." for ever. When I check the IP adresses, the SIP Proxy and
Registrar fields are empty. 

This is not a network problem, I have made traces using Ethereal and I can
see the right .txt file being transferred. Other settings in the file are
applied too, just the SIP proxy and registrar are empty. I have tried
specifying them with and without quotes, by hostname, by IP address, . Nada.

It is all the more frustrating that everybody seems to have it working
easily! Please help. 

Here is the contents of my 46xxsettings.txt file : 

SET DOMAIN mycompany.com 
SET DNSSRVR 204.140.111.43 
SET PHNCC 352 
SET PHNDPLENGTH 4 
SET PHNIC 00 
SET PHNOL 0 
SET SYSLANG English 
SET APPSTAT 1 
SET RESTORESTAT 1 
SET AGCHAND 0 
SET AGCHEAD 0 
SET AGCSPKR 0 
SET SNTPSRVR  "204.140.111.200" 
SET DSTOFFSET "1" 
SET DSTSTART  "1SunApr2L" 
SET DSTSTOP   "LSunOct2L" 
SET GMTOFFSET "-5:00" 
SET DATESEPARATOR   "/" 
SET DATETIMEFORMAT  "3" 
SET DIALPLAN     "[234]xxx|55xxxx" 
SET DIALWAIT     "3" 
SET MUSICSRVR    "" 
SET MWISRVR      "" 
SET PHNNUMOFSA   "3" 
SET REGISTERWAIT 120 
SET SIPDOMAIN " <http://sip.mycompany.com>  sip.mycompany.com" 
SET SIPPROXYSRVR "204.140.111.219 " 
SET SIPPORT "5070"                              (this is not a typo) 
SET SIPREGISTRAR "204.140.111.219" 
SET SP_DIRSRVR 10.1.1.1 
SET SP_DIRSRVRPORT 389 
SET SP_DIRTOPDN ou=People,o= <http://avaya.com>  avaya .com 
IF $MODEL4 SEQ 4602 goto SETTINGS4602 
IF $MODEL4 SEQ 4610 goto SETTINGS4610 
IF $MODEL4 SEQ 4620 goto SETTINGS4620 
IF $MODEL4 SEQ 4621 goto SETTINGS4621 
IF $MODEL4 SEQ 4622 goto SETTINGS4622 
IF $MODEL4 SEQ 4625 goto SETTINGS4625 
IF $MODEL4 SEQ 4630 goto SETTINGS4630 
goto END 
goto END 
SET WMLHOME  <http://support.avaya.com/elmodocs2/avayaip/4620/home.wml>
http://support.avaya.com/elmodocs2/avayaip/4620/home.wml 
SET WMLPROXY 204.140.111.249 
SET WMLPORT 3128 
goto END 
goto END 
goto END 
goto END 
goto END 
SET WEBHOME  <http://support.avaya.com/elmodocs2/avayaip/4630/index.htm>
http://support. avaya.com/elmodocs2/avayaip/4630/index.htm 
SET PHNEMERGNUM 112 
goto END 

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com -- 

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com  <http://Easynews.com>
--

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060629/643a2d72/attachment.htm