[Asterisk-Users] beronet BNS40 led blinking: not working or not connected?

[Giorgio Incantalupo]

Hi Kai,
when I connect the ISDN line the LED is not blinking anymore. I think it 
is working now.

Thanks.

Giorgio Incantalupo


Kai Ober wrote:
> Have you startet the asterisk allready?
>
> When i boot my machine, and dont start the astersik, the LED's keep 
> flashing all day. (even when lines are connected) and
> even  if /etc/init/misdn_init has been startet
>
>
> TIP: First connect all Lines/Phones to the card, then start asterisk. 
> not 100% sure,
> but i think the card or the asterisk, or the isdn stack,  will not 
> recognize any new lines added during a running asterisk "session".
>
>
>
>
> Giorgio Incantalupo schrieb:
>> Hi,
>> I've just installed a beronet BNS40 on Asterisk 1.2.9.1. Everything 
>> seems ok, asterisk gives no error (nothing inside logs) but the 4 led 
>> on the back of the card (which is NOT connected to an ISDN line) are 
>> red and flashing....what does it mean? Is it not properly working or 
>> it means the card is not connected to any ISDN line? The card 
>> handbook says the card has red led but not their meaning.
>>
>> TIA
>>
>> Giorgio Incantalupo
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> Asterisk-Users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>