Subject: [Asterisk-Users] Passing DID to external number?

[Philippe Lindheimer]

For the DID's the easiest way for you to trasmit the incoming DID is to create custom extensions for the external numbers that access the external trunk directly. (e.g. they should NOT go to Loca/xxxx. or it will not retain the orignal CID in freepbx- which is effectively how it is being sent when you put xxxxx# in the ring list).

As far as why it is only ringing one of your external numbers, I can only guess (with the limited information) that you may only have a single outbound channel available on your trunk so the second number is getting rejected? (Look in the log and see if it tells you that or if not provides additonal clues).

p


From: "Brian McCarey" <brian_mccarey at hotmail.com>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
 <asterisk-users at lists.digium.com>
Date: Thu, 22 Jun 2006 18:40:25 +0100
Subject: [Asterisk-Users] Passing DID to external number?

     Hi,
  
 We run a small  switchboard using Asterisk and Free PBX.
  
 We have two main  extensions and two ring groups. The first ring group rings the two internal  extensions. If the internal extensions do not pick up the call after 15 seconds  then the second ring group kicks in which should ring the two internal  extensions plus two external numbers.
  
 Firstly, how do I  pass the DID number of an incoming call to the external number so that the  external number sees the incoming number and not the voip dial out  number?
  
 Secondly, when the  second ring group kicks in only one of the external numbers dials when both  internal extensions and both external numbers should ring according to the ring  group setting. Any ideals what's going wrong?
  
 Kind  regards
  
 Brian.  UK



 		
---------------------------------
How low will we go? Check out Yahoo! Messenger’s low  PC-to-Phone call rates.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060622/3baf9002/attachment.htm