[Asterisk-Users] No "ringing" being played to remote caller?

[Eric "ManxPower" Wieling]

If there is an Answer(), Playback(), Background(), or anything else that 
answers the line before Dial(), you must have set up 
/etc/asterisk/indications.conf or Asterisk will not know how to do 
inband ringback.

Derek wrote:
> Hi all,
> 
> I've got a fairly simple setup, a 4 port zaptel T1 card with 1 PRI and 2 
> flat e&m T1's coming into it, and its working perfectly except for one 
> small thing. When people dial any of the numbers on either the PRI or 
> the T1 from outside of the pbx, they dont get the "ringing" sound. It 
> just directly connects the call. I know this isnt much, but its started 
> to bother a couple of people and I was wondering if there was a way to 
> fix it?
> 
> zaptel.conf:
> span=1,1,0,esf,b8zs
> bchan=1-23
> dchan=24
> loadzone = us
> 
> span=2,1,0,esf,b8zs
> e&m=25-48
> span=3,1,0,esf,b8zs
> e&m=49-72
> 
> loadzone = us
> defaultzone=us
> 
> zapata.conf:
> [channels]
> group = 0
> switchtype=national
> signalling=pri_cpe
> channel=>1-23
> 
> group = 1
> context=from-trunk
> emdigitwait=2500
> signalling=em_w
> rxwink=300
> usecallerid=yes
> immediate=no
> overlapdial=yes
> channel=>25-72
> 
> Any help is appreciated.
> 
> 


-- 
Now accepting new clients in Birmingham, Atlanta, Huntsville, 
Chattanooga, and Montgomery.