[Asterisk-Users] SPA-941 Disable call waiting or Disable Call waiting via asterisk

Tommaso Calosi tommaso.calosi.list at sysmic.it
Wed Jun 14 08:52:48 MST 2006


Well, it does help, but it causes the announced transfer to fail, 
because if you set call-limit=1 you cannot dial out to announce the 
transfer...

Alberto Sagredo wrote:
> It has a conceptual problem i have notified several times to 
> Cisco-Linksys. It could not be disabled, i have the same problem with 
> my queue extensions, and the way to resolve has been to use 
> call-limit=1 in extensions.
>
> i hope this helps.
>
> Tommaso Calosi escribió:
>> I'm trying to disable call waiting for Linksys SPA-941, but 
>> unfortunately as far as I have seen, there are no parameters on the 
>> web interface regarding this feature. I just want callers to hear the 
>> busy tone when the called party is at the phone. Probably I can 
>> accomplish this by using the "disable call waiting" in asterisk as 
>> well, but I have not been able to find any documentation for this. I 
>> have found this 
>> http://www.voip-info.org/wiki/index.php?page=PBX+Disable+Call+Waiting 
>> about call waiting,  but it's quite unusefull.
>>
>> Thanks
>>
>> Tommaso Calosi
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> Asterisk-Users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>
>




More information about the asterisk-users mailing list