[Asterisk-Users] use AT320 international call

[Min Qiu]

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Thomas Kenyon
> Sent: Monday, June 12, 2006 2:06 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] use AT320 international call
> 
> 
> Min Qiu wrote:
> > Hi all,
> >
> > The firmware I used is pa168s_iax2_us_151011.bin.
> >
> > My problem is the handset dial before I finished key in all 
> > the numbers, no matter how fast I managed to press the keys.  
> > It appeared it always dialed immediately, for example "011862",  
> > when I actually ment to dial 0118620xxxxxxxx.  Thus left the 
> > remaining numbers "0xxxxxxxx" unsent.
> >
> > The handset had its dial plan disabled.  It configured to use 
> > iax protocol.  My extensions.conf has this:
> >
> > exten=_01186.,1, dial(SIP/<voipprovider>,60)
> >
> > and it works fine with other iaxy and Cisco ATA.
> >
> > Anyone encounter this symptom?  Can you share your experience?
> >
> > Thanks,
> >
> > Min
> >
> >   
> Do you have remote dialplan ticked? (only available in the 
> IAX firmware).

Not sure, I'll double check...

> This function causes the above effect and can only appears to 
> work with
> very simple dialplans and should generally not be used.
> 
> You may want to roll-back to the 1.50 firmware (ask if you 
> can't find it
> elsewhere) there are sound quality issues with the 1.51 release.

Arh... I did experence sound quality issues and I pointed 
my finger toward my VoIP provider;-)  Good to know.  Can 
you pass a pointer to where I can get 1.50?

Thanks a lot,

Min


> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>