[Asterisk-Users] FXO registration and VegaStream

[Issac Simchayof]

Pete,

Thanks for the reply! If you don't mind I would love to take a look at the
script I am sure it will be great help.

Thanks,

Issac



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Peter Doyle
Sent: Saturday, June 10, 2006 5:16 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] FXO registration and VegaStream

Hi Isaac,
I am a newbie to Asterisk (hoping to set up a system for my office) and
I have been struggling with the Vega 5010 (10 FXO) as well.

I've had the same problem as you, being able to call out, but not
receive calls.  I just found a solution (for my setup atleast).

First off, I have the Vega set up according to some very basic
instructions from this list (for a different Vega) and from the getting
started setup guide from the Vegastream CD.

I have "enable registration" set (under SIP options in the Vega's web
config), which makes the Vega register with Asterisk.  I am currently
testing with only one line coming into port 1, which has an
"Authentication Number" (see PSTN options in Vega's web config) of 01
and a "Interface Number" of 06.  Basically, the vega registers with
username 01, but sends the call to asterisk with 06@{vega's ip here} as
the address.

When I'd do a "sip debug" during an incoming call, I'd see asterisk
responding with a "SIP/2.0 404 Not Found" error, causing the vega to
answer and immediately hang up.

I figured asterisk was looking for SIP user 06, so I added it, but I
still got 404's.  Turns out I just needed an EXTENSION, 06.  I can now
make calls and receive them, too.  Of course, if you have multiple
incoming lines, you'd need extension 06, 07, 08 ... etc, since each port
has its own "Interface Number" (by default), to allow routing of calls
made to different lines.

I hope that helps some.  If not, I can send my complete configs,
although I'm sure there's some other problems with them.  Now, if only I
could get rid of the echo, I'd be a happy man!

Pete Doyle

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Issac
Simchayof
Sent: Friday, June 09, 2006 7:10 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] FXO registration and VegaStream

I am trying to configure a VegaStream 50 FXO to work with asterisk. The
problem that I am having is that the VegaStream does not support
incoming registration from asterisk.  VegaStream only allows outbound
registration. 

My question is does asterisk allow incoming registration from an FXO? If
yes how? Or better yet, has anybody been able to make the VegaStream FXO
work with asterisk? According to VegaStream they have many clients using
this combo but they haven't been very helpful otherwise.




_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users