[Asterisk-Users] No CID on ZAP

[Curt Shaffer]

[channels]
language=en
#include zapata_additional.conf
context=from-zaptel
signalling=fxs_ks
faxdetect=incoming
usecallerid=asreceived
echocancel=yes
callprogress=no
busydetect=no
echocancelwhenbridged=no
echotraining=800
group=0
channel=>1

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tom Vile
Sent: Friday, June 09, 2006 11:53 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] No CID on ZAP

Thanks for sharing that info.

How about sharing your zapata.conf configuration so that someone can
look at it and maybe see if there is a problem.

I'm guessing you want help with this.

On 6/9/06, Curt Shaffer <cshaffer at gmail.com> wrote:
>
>
>
>
> I am using asterisk version 1.2.6 with Zaptel version 1.2.5. I have a POTs
> line coming into a Digium TDM01B. It appears to not be getting CID at all.
> If I hook up a POTS phone to the line CID comes through fine. Inbound and
> outbound calls work fine but there is just no CID on inbound for this
> channel.The incoming route for the channel is Zaptel Channel 0. No DID or
> CID settings applied. My IP routes inbound are providing CID with no
issue.
>
>
>
>
>
> Here is the output from the log when a call is coming in:
>
>
>
>     -- Starting simple switch on 'Zap/1-1'
>
>     -- Executing NoOp("Zap/1-1", "Entering from-zaptel with DID == ") in
new
> stack
>
>     -- Executing Set("Zap/1-1", "DID=s") in new stack
>
>     -- Executing NoOp("Zap/1-1", "DID is now s") in new stack
>
>     -- Executing GotoIf("Zap/1-1", "1?zapok:notzap") in new stack
>
>     -- Goto (from-zaptel,s,7)
>
>     -- Executing NoOp("Zap/1-1", "Is a Zaptel Channel") in new stack
>
>     -- Executing Set("Zap/1-1", "CHAN=1-1") in new stack
>
>     -- Executing Set("Zap/1-1", "CHAN=1") in new stack
>
>     -- Executing Macro("Zap/1-1", "from-zaptel-1|s|1") in new stack
>
>     -- Executing NoOp("Zap/1-1", "Returned from Macro from-zaptel-1") in
new
> stack
>
>     -- Executing Goto("Zap/1-1", "ext-did|s|1") in new stack
>
>     -- Goto (ext-did,s,1)
>
>     -- Executing Set("Zap/1-1", "FROM_DID=s") in new stack
>
>     -- Executing Goto("Zap/1-1", "ext-local|200|1") in new stack
>
>     -- Goto (ext-local,200,1)
>
>     -- Executing Macro("Zap/1-1", "exten-vm|200|200") in new stack
>
>     -- Executing Macro("Zap/1-1", "user-callerid") in new stack
>
>     -- Executing GotoIf("Zap/1-1", "0?report") in new stack
>
>     -- Executing GotoIf("Zap/1-1", "0?start") in new stack
>
>     -- Executing Set("Zap/1-1", "REALCALLERIDNUM=") in new stack
>
>     -- Executing NoOp("Zap/1-1", "REALCALLERIDNUM is ") in new stack
>
>     -- Executing Set("Zap/1-1", "AMPUSER=") in new stack
>
>     -- Executing Set("Zap/1-1", "AMPUSERCIDNAME=") in new stack
>
>     -- Executing GotoIf("Zap/1-1", "1?report") in new stack
>
>     -- Goto (macro-user-callerid,s,9)
>
>     -- Executing NoOp("Zap/1-1", "Using CallerID "" <>") in new stack
>
>     -- Executing Set("Zap/1-1", "FROMCONTEXT=exten-vm") in new stack
>
> -- Executing Set("Zap/1-1", "VMBOX=200") in new stack
>
>     -- Executing Set("Zap/1-1", "EXTTOCALL=200") in new stack
>
>     -- Executing Set("Zap/1-1", "CFUEXT=") in new stack
>
>     -- Executing Set("Zap/1-1", "RT=25") in new stack
>
>     -- Executing Macro("Zap/1-1", "record-enable|200|IN") in new stack
>
>     -- Executing GotoIf("Zap/1-1", "0 > 0?2:4") in new stack
>
>     -- Goto (macro-record-enable,s,4)
>
>     -- Executing AGI("Zap/1-1",
> "recordingcheck|20060609-095557|1149864957.408") in new
> stack
>
>     -- Launched AGI Script
> /var/lib/asterisk/agi-bin/recordingcheck
>
>   recordingcheck|20060609-095557|1149864957.408: Inbound
> recording not enabled
>
>     -- AGI Script recordingcheck completed, returning 0
>
>     -- Executing NoOp("Zap/1-1", "No recording needed") in new stack
>
>     -- Executing GotoIf("Zap/1-1", "0?dolocaldial|1") in new stack
>
>     -- Executing Macro("Zap/1-1", "dial|25|tr|200") in new stack
>
>     -- Executing AGI("Zap/1-1", "dialparties.agi") in new stack
>
>     -- Launched AGI Script
> /var/lib/asterisk/agi-bin/dialparties.agi
>
> dialparties.agi: Starting New Dialparties.agi
>
>     --  dialparties.agi: priority is 1  dialparties.agi: Caller ID name is
> 'unknown' number is 'unknown'
>
>  dialparties.agi: Methodology of ring is  'none'
>
>     --  dialparties.agi: Added extension 200 to extension map
>
>     --  dialparties.agi: Extension 200 cf is disabled
>
>     --  dialparties.agi: Extension 200 do not disturb is disabled
>
>   == Parsing '/etc/asterisk/manager.conf': Found
>
>   == Manager 'admin' logged on from 127.0.0.1
>
>   == Manager 'admin' logged off from 127.0.0.1
>
>     --  dialparties.agi: Checking CW and CFB status for extension 200
>
>     --  dialparties.agi: DbSet CALLTRACE/200 to unknown
>
>     -- AGI Script dialparties.agi completed, returning 0
>
>     -- Executing Dial("Zap/1-1", "SIP/200|25|tr") in new stack
>
>
>
> Any help would be appreciated.
>
>
>
>
>
>
>
> Thanks
>
>
>
> Curt
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>


-- 
Tom Vile
Baldwin Technology Solutions, Inc
Consulting - Web Design - VoIP Telephony
www.baldwintechsolutions.com
Phone: 518-631-2855 x205
Fax:     518-631-2856
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users