[Asterisk-Users] CISCO POE

[Tarpo, Louie]

The POE switch needs to support "always on".   Most switches check the device for 802.3af support before turning on power.   The phones only support the CDP power activation, not 802.3af.   I've used "always on" POE injectors from wireless access points successfully with Cisco phones.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of nik600
Sent: Wednesday, June 07, 2006 7:35 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] CISCO POE


many thanks for your reply

i've tried to make  a cable with that configuration but it seems that
it doesn't work...

i'm using a 7905G Cisco ip phone and an ALL0484 Switch POE

thanks
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users