[asterisk-users] RemoveQueueMember isn't working.

[Keith Herrington]

Hey guys. I've ran into a queue issue that I'm wondering if anyone has
seen. 
I am using FreePBX with Asterisk 1.2.9.1 svn rev 34876.
 
I have setup a queue of 1082. I login to the Queue fine with 1082*, and
receive calls via the queue. When I try to logout with 1082**, Alison
says I was removed, but when I do a 'show queue 1082' I'm still listed.
If I use the CLI and go 'remove queue member Local/1409 from 1082' it
works as expected.

Any ideas?
 
This is CLI output: 
- Goto (macro-agent-del,s,5) 
-- Executing Set("SIP/1409-60bb", "CALLBACKNUM=1409") in new stack 
-- Executing GotoIf("SIP/1409-60bb", "0?2)") in new stack 
-- Executing RemoveQueueMember("SIP/1409-60bb",
"1082|Local/1409 at from-internal/n") in new stack 
-- Executing UserEvent("SIP/1409-60bb", "RefreshQueue") in new stack 
-- Executing Wait("SIP/1409-60bb", "1") in new stack 
-- Executing Playback("SIP/1409-60bb", "agent-loggedoff") in new stack 
-- Playing 'agent-loggedoff' (language 'en') 
-- Executing Hangup("SIP/1409-60bb", "") in new stack 
asterisk1*CLI> show queues 
1082 has 0 calls (max unlimited) in 'ringall' strategy (0s holdtime),
W:0, C:0, A:0, SL:0.0% within 0s 
Members: 
Local/1409 at from-internal (dynamic) (Unknown) has taken no calls yet 
No Callers 
 
 asterisk1*CLI> remove queue member Local/1409 at from-internal from 1082 
Removed interface 'Local/1409 at from-internal' from queue '1082' 
asterisk1*CLI> show queue 1082 
1082 has 0 calls (max unlimited) in 'ringall' strategy (0s holdtime),
W:0, C:0, A:0, SL:0.0% within 0s 
No Members 
No Callers 

Here's a pastebin to my queues.conf and my extensions.conf sections:
http://www.pastecode.com/2334 

Thanks in advance!

Keith