[asterisk-users] Re: Fritz!Box Fon ATA

[Manuel Dominguez]

Hi Martin, you say only a bit of work? ;-)

1. Incoming

Yes, works like you suggest me!! The problem is that using this method, it's
not possible to use the FXS ports in the Fritz!Box like normal extensions
from Asterisk. We only use it to forward calls to a SIP extension.

2. Outbound

I don’t understand exactly your comments but I think is working. I go to the
Rufumleitung -> Durchwahl (Call Through) aktiv -> definierte Durchwahl. In
the combo box "Durchwahl für Anrufe auf der Rufnummer" I select my
connection to Asterisk. I write a PIN and in the combo box "Anrufe
weiterverbinden über die Rufnummer" I select the Festnetz. 
>From a SIP phone, I make a call to the extension selected in "Durchwahl für
Anrufe auf der Rufnummer". In that moment another tone appears, I enter the
PIN and I can make an external call from the SIP phone.

Thanks for you help & greeting from Spain

Manuel
  
-----Mensaje original-----
De: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] En nombre de
asterisk-users-request at lists.digium.com
Enviado el: viernes, 28 de julio de 2006 13:50

Message: 16
Date: Fri, 28 Jul 2006 13:53:50 +0200
From: "Martin Schrott - Thinking-Systems"
	<martin.schrott at thinking-systems.eu>
Subject: Re: [asterisk-users] Re: Fritz!Box Fon ATA
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
	<asterisk-users at lists.digium.com>
Message-ID: <000401c6b23c$7ef67220$0100a8c0 at dicore.net>
Content-Type: text/plain;	charset="iso-8859-1"

Hi again,

should both be possible. With a bit of work ;-)
1. incoming.
You will have to set Rufumleitung to your choosen sip destination.
telefonie>
Rufumleitung>
set the fone, that is set up to be ringing to be forwarded to your sip
extension. As named in your extensions.conf local context.
All incoming calls should then be forwarded to your asterisk.

2. Outbound
Not as easy. Maybe you can realize that as follows:
Telefonie>
Rufumleitung>
Callthrough
(Direktdurchwahl)
You may be able to set internet calls from a given did to be presented a
callthrough option.
Set internetcalls e.g. from 12345 to callthrough via Festnetz (psd)
Then it should be possible to dial through when calling from Asterisk to
your Fritz!Box if your callerid is 12345.
(Never tested this. But with a bit of luck and time you can do it :-) )

all the best hth
Martin

----- Original Message ----- 
From: "Manuel Dominguez" <manuelmovil at teleline.es>
To: <asterisk-users at lists.digium.com>
Sent: Friday, July 28, 2006 12:13 PM
Subject: [asterisk-users] Re: Fritz!Box Fon ATA



Hi Martin,

Thank you for your comments. I made more or less these settings and in this
moment I can make call from de FXS port to asterisk and from asterisk to FXS
ports.
My problem it's the FXO part of this ATA. I want to redirect all the
incoming ISDN calls to a SIP phone or to an autoatendant and to make
outgoing calls from sip phones (asterisk). I'm not sure if it s possible
make this work using this ATA and the necessary settings.

Manuel

------------------------------

Message: 8
Date: Fri, 28 Jul 2006 09:59:07 +0200
From: "Martin Schrott - Thinking-Systems"
<martin.schrott at thinking-systems.eu>
Subject: Re: [asterisk-users] Fritz!Box Fon ATA
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Message-ID: <002101c6b21b$b49bac40$0100a8c0 at dicore.net>
Content-Type: text/plain; charset="iso-8859-1"

Hi Manuel,

I do not know the ATA, but we have a Fritz!Box fon, wich maybe is equal in
setting it up.

If you have any problems understanding the german setup, you can contact me,
so I can help you in translating the needed Words :-)

Normally you only have to do this on the Webinterface:

Telefonie>
Internettelefonie>
Internetrufnummern>
Neue Internetrufnummer>
Internetrufnummer: Your VOIP number, or if using with isdn, then the msn.
Do not use Internetrufnummer zum Anmelden verwenden!
Registrar: the ip or host of your provider or Asterisk. If you have a own
Asterisk use yur ip adress. There is a bug using hostnames.
Benutzername: Username
Passwort / Kennwort : password

Do only fill out this fields, then it should work. If you put in any proxy
or Stun Servers it may not work. (our experience)

hth,
Martin

----- Original Message ----- 
From: "Manuel Dominguez" <manuelmovil at teleline.es>
To: <asterisk-users at lists.digium.com>
Sent: Friday, July 28, 2006 9:25 AM
Subject: [asterisk-users] Fritz!Box Fon ATA


Hi,
I have bought a Fritz!Box Fon ATA in eBay. I'm trying to find information
about configuration this box in Asterisk.
Its possible use this box like a normal ATA (sipura 3000.) receiving and
making ISDN calls from Asterisk? Somebody has information in English about
this box? Some example settings?
Another problem is that firmware is in German. I have tried to change it but
was not possible to use a difference language. Some ideas?

Any help would be greatly appreciated

Manuel


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users