[asterisk-users] PAP2T always busy on incoming calls with zaptel

[Joshua Colp]

----- Original Message -----
From: Olivier MONNET
[mailto:olivier.monnet at altiva.fr]
To: Asterisk Users Mailing List -
Non-Commercial Discussion [mailto:asterisk-users at lists.digium.com]
Sent:
Fri, 28 Jul 2006 05:11:35 -0300
Subject: [asterisk-users] PAP2T always busy
on incoming calls with zaptel


> Hi,
> I'm starting to use the new PAP2T instead of the old PAP2-NA for my  
> new installations.
> I'm having a weird problem: when a call is comming from a zaptel  
> channel (from a bri with bristuff driver) the PAP2T say BUSY to the  
> SIP channel.

What's the exact SIP response the PAP2T gives? Might it be possible to get a sip debug on a pastebin so myself and others can examine the full dialog?


> I have disabled all the features like DND and call forward.
> If it's the last line for this number in the dialplan I can answer  
> the call normally, but I can't use voicemail, because it jump to it  
> each time.
> I have installed about 50 PAP-NA and never had this kind of problem.
> If the call is coming from an other PAP2T (via asterisk with  
> canreinvite=no), everything is fine.
> 
> This occur with asterisk 1.0.10 and 1.2.9.1
> 
> the firmware version for the PAP2T is 3.1.9(LSc)
> 
> I am using a dialplan coming from another customer with a similar  
> setup, but with PAP2-NA, where  it's working fine.
> 
> What can I do to fix this.
> 
> Regards,
> Olivier
> 

Joshua Colp
Digium