[asterisk-users] Clocking Multiple T1 Cards

[Doug Lytle]

Shaw Terwilliger wrote:
> [ I originally sent this to the list last week but it never arrived;
>   it may have been stuck in moderation because the sending address is
>   not my subscribed address.  I apologize if you get this twice. ]
>
> I have a Digium TE205P connected to two channel banks in my Asterisk.
> PBX.  I will be installing a Sangoma A101 to be connected to a PSTN PRI
> in the same box.  How should I go about configuring the T1 timing for
> these spans?  Right now my zapata.conf contains span definitions like
> the following:
>
> span=1,0,0,esf,b8zs
> span=2,0,0,esf,b8zs
>   

You need to take your timing from the telco.

Doug

-- 
 
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."