[asterisk-users] RE: [asterisk-dev] How to send DNIS(B-party
number) in IAX trunk
Paul Hales
pdhales at optusnet.com.au
Thu Jul 20 18:06:33 MST 2006
Sam, the issue is that when dialling out you are missing the ${EXTEN} or
similar variable from your dial string - IAX should be IAX/SERVER/EXTENSION_AT_REMOTE_SERVER - and from your readout the last bit is not in your dialstring.
Does this make sense?
Kind regards,
Paul Hales
www.asteriskit.com.au
>
> On Wed, 2006-07-19 at 17:45 -0600, Sam Liang wrote:
> > Hi Rehan,
> >
> >
> > I would like to make the my problem a little bit more clear.
> >
> > My test scheme is below:
> >
> >
> > R1 R2 IAX trunk
> > DX <-----> PORTASIP <------------> ASTERISK-root <------> Astrerisk-client
> >
> >
> >
> > DX connect to ISDN E1, says, got 100 Australian number from 61282138600 to
> > 61282138699 assign to it.
> >
> > I create the route R1 without any problem. From PortaSIP, we pass the call
> > by a sip trunk name R2, this one proved to be fine, since I can read from
> > the real time log of the ASTERISK-root script that
> > /var/lib/asterisk/agi-bin/dialparties.agi had already output the messages,
> > said that it filter out the dnid=61282138622. The ASTERISK-root, according
> > the dnid=61282138622, bridges the call invite through IAX trunk to invite
> > the Asterisk-client.
> >
> > I can read from the Asterisk-client real time log as below:
> > (ASTERISK-root with address 203.166.103.230)
> >
> >
> > -- Accepting AUTHENTICATED call from 203.166.103.230:
> > > requested format = g729,
> > > requested prefs = (),
> > > actual format = ulaw,
> > > host prefs = (ulaw|alaw|gsm|g729),
> > > priority = mine
> > -- Executing Set("IAX2/isphone-2", "FROM_DID=s/0413509414") in new stack
> > -- Executing Goto("IAX2/isphone-2", "ext-local|200|1") in new stack
> > -- Goto (ext-local,200,1)
> > -- Executing Macro("IAX2/isphone-2", "exten-vm|200|200") in new stack
> > -- Executing Macro("IAX2/isphone-2", "user-callerid") in new stack
> > -- Executing Set("IAX2/isphone-2", "AMPUSER=") in new stack
> > -- Executing Set("IAX2/isphone-2", "EMERGENCYCID=") in new stack
> > -- Executing Set("IAX2/isphone-2", "AMPUSERCIDNAME=") in new stack
> > -- Executing GotoIf("IAX2/isphone-2", "1?6") in new stack
> > -- Goto (macro-user-callerid,s,6)
> > -- Executing NoOp("IAX2/isphone-2", "Using CallerID "" <0413509414>") in
> > new stack
> > -- Executing Set("IAX2/isphone-2", "FROMCONTEXT=exten-vm") in new stack
> > -- Executing Macro("IAX2/isphone-2", "record-enable|200|IN") in new
> > stack
> > -- Executing GotoIf("IAX2/isphone-2", "0 > 0?2:4") in new stack
> > -- Goto (macro-record-enable,s,4)
> > -- Executing AGI("IAX2/isphone-2",
> > "recordingcheck|20060719-143711|1153283831.27") in new stack
> > -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
> > recordingcheck|20060719-143711|1153283831.27: Inbound recording not
> > enabled
> > -- AGI Script recordingcheck completed, returning 0
> > -- Executing NoOp("IAX2/isphone-2", "No recording needed") in new stack
> > -- Executing Macro("IAX2/isphone-2", "dial|15|tr|200") in new stack
> > -- Executing AGI("IAX2/isphone-2", "dialparties.agi") in new stack
> > -- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
> > -- dialparties.agi: priority = 1
> > -- dialparties.agi: callingani2 = 0
> > -- dialparties.agi: accountcode =
> > -- dialparties.agi: channel = IAX2/isphone-2
> > -- dialparties.agi: callerid = 0413509414
> > -- dialparties.agi: context = macro-dial
> > -- dialparties.agi: callington = 0
> > -- dialparties.agi: dnid = unknown
> > -- dialparties.agi: request = dialparties.agi
> > -- dialparties.agi: calleridname = unknown
> > -- dialparties.agi: extension = s
> > -- dialparties.agi: language = en
> > -- dialparties.agi: uniqueid = 1153283831.27
> > -- dialparties.agi: callingpres = 0
> > -- dialparties.agi: type = IAX2
> > -- dialparties.agi: rdnis = unknown
> > -- dialparties.agi: callingtns = 0
> > -- dialparties.agi: enhanced = 0.0
> > dialparties.agi: Caller ID name is 'unknown' number is '0413509414'
> > dialparties.agi: Methodology of ring is 'none'
> > -- dialparties.agi: Added extension 200 to extension map
> > -- dialparties.agi: Extension 200 cf is disabled
> > -- dialparties.agi: Extension 200 do not disturb is disabled
> > > dialparties.agi: extnum: 200
> > > dialparties.agi: exthascw: 0
> > > dialparties.agi: exthascfb: 0
> > > dialparties.agi: extcfb:
> > -- dialparties.agi: Checking CW and CFB status for extension 200
> > == Parsing '/etc/asterisk/manager.conf': Found
> > == Parsing '/etc/asterisk/manager_custom.conf': Found
> > == Manager 'admin' logged on from 127.0.0.1
> > -- dialparties.agi: Correct AMPMGRUSER and AMPMGRPASS
> > > dialparties.agi: extstate: 0
> > == Manager 'admin' logged off from 127.0.0.1
> > dialparties.agi: Extension 200 is available...skipping checks
> > -- dialparties.agi: DbSet CALLTRACE/200 to 0413509414
> > -- AGI Script dialparties.agi completed, returning 0
> > -- Executing Dial("IAX2/isphone-2", "IAX2/200|15|tr") in new stack
> > -- Called 200
> > -- Call accepted by 61.29.101.98 (format ulaw)
> > -- Format for call is ulaw
> > -- IAX2/200-5 is ringing
> > -- IAX2/200-5 answered IAX2/isphone-2
> > -- Attempting native bridge of IAX2/isphone-2 and IAX2/200-5
> > -- Hungup 'IAX2/200-5'
> > == Spawn extension (macro-dial, s, 10) exited non-zero on 'IAX2/isphone-2'
> > in macro 'dial'
> > == Spawn extension (macro-dial, s, 10) exited non-zero on 'IAX2/isphone-2'
> > in macro 'exten-vm'
> > == Spawn extension (macro-dial, s, 10) exited non-zero on 'IAX2/isphone-2'
> > -- Hungup 'IAX2/isphone-2'
> >
> >
> > >From the log messages above us, I am sure the Asterisk-client can not get
> > the dnid, or the dnid = unknown is got by the
> > /var/lib/asterisk/agi-bin/dialparties.agi. Consequently I must create a
> > route in asterisk to said, DID=*/callerid=0413509414 will be route to
> > extensions 200.
> >
> > That make the call from mobile 0413509414 to 821386[XX] go to extensions
> > 200. But what I want to make for the client is, provided I can pass the
> > DNID to the customer Premium, DID=82138622 to extension 200, DID=32138600 to
> > receptionist, etc...
> >
> > I am stuck on the place of unable to pass the DNID variable to the
> > Asterisk-client by IAX-trunk.
> >
> > The reason of we want to create an Asterisk-root between our PortaSIP and
> > the Asterisk-client is, we want to be benefit from the IAX trunk of packet
> > saving and etc.
> >
> > But we just can not pass the DNID(B-party number to the client Asterisk)
> > Hope that you can have some idea to help us.
> >
> > We did not get the DID from didx.
> >
> > Best regards,
> >
> > Sam
> >
> > -----Original Message-----
> > From: Rehan AllahWala [mailto:rehan at supertec.com]
> > Sent: Wednesday, July 19, 2006 5:53 PM
> > To: samliang at isphone.com.au
> > Subject: Re: [asterisk-dev] How to send DNIS(B-party number) in IAX trunk
> >
> > Hello,
> >
> > Have u tried did's from didx if they pass dnis to u ?
> >
> > Rehan
> >
> > From: "Sam Liang" <samliang at isphone.com.au>
> > To: <asterisk-dev at lists.digium.com>
> > Date sent: Wed, 19 Jul 2006 14:53:04 +1000
> > Subject: [asterisk-dev] How to send DNIS(B-party number) in IAX trunk
> > Send reply to: Asterisk Developers Mailing List
> > <asterisk-dev at lists.digium.com>
> > <mailto:asterisk-dev-request at lists.digium.com?subject=unsubscribe>
> > <mailto:asterisk-dev-request at lists.digium.com?subject=subscribe>
> >
> > > Hi,
> > >
> > > I am a voip engineer in a Sydney company,
> > >
> > > We got a problem when we want to set up multiple IAX trunks.
> > >
> > > We set up the trunk from PortSIP to IAX2 trunk fine. But when the customer
> > > set up a Asterisk trunk to our Asterisk server, which hopefully relay
> > > multiple call from PortaSIP into our Asterisk and then to the customer
> > > Asterisk server by the specific trunk. We get a problem. Our PortaSIP
> > send
> > > out the DID into Asterisk, Asterisk grasp the DID with AGI function, but
> > > when the call go further into customer premise Asterisk DID, Our Asterisk
> > > just bridge the call to the customer's IAX2 trunk, but failed to pass the
> > > DID number further,
> > >
> > > That means our customer can only create a single number trunk with our
> > > Asterisk, instead of what we want to achieve for the read PABX, multiple
> > DID
> > > route inside a single IAX2 trunk.
> > >
> > > I will like to enclose the Asterisk log here as well, the ITSP_Asterisk
> > log
> > > contain the log information when a call make to the premium with DID_NUM
> > > 61282138622, and the customer_side_Asterisk.log contain the concurrent log
> > > of the customer premium Asterisk log.
> > >
> > > Our Asterisk use Asterisk realtime engine 1.2.1
> > >
> > > Customer use Asterisk at Home 2.8 which is 1.2.7
> > >
> > > Best regards,
> > >
> > > Sam Liang
> > >
> > > Support Network Engineer
> > >
> > > ISPhone Australasia Pty Ltd
> > >
> > > Tel: +61 (0)2 8213 8686
> > >
> > > Fax: +61 (0)2 8213 8685
> > >
> > > Mob: 0413509414
> > >
> > > email: samliang at isphone.com.au
> > >
> > > web: www.isphone.com.au
> > >
> > >
> > >
> > >
> >
> >
> > Super Technologies Inc., Pensacola, Florida
> > http://www.SuperTec.com - Technologies from tomorrow, Today!
> >
> > MSN: Rehan at Rehan.com
> > Skype: Rehan33
> >
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-dev mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-dev
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list