[asterisk-users] Problem with MFCR2

[Moises Silva]

>         So if the far end does not unblock then the telco has not finished
> activating the line?

Right,  :)

If the other end (the telco) has activated your line correctly, here
in Mexico you should be receiving in ABCD bits 1001, you can confirm
that by using zttool command and selecting the correct SPAN. When both
sides are on "Idle", Rx and Tx ABCD bits are in 1001.

If you want to discard any problem on your side, and you have 2 ports
available, you can make a crossover E1 cable and make a loop between
the 2 ports. Then try making calls in your own box.

Regards.

On 7/19/06, Carlos Chavez <cursor at telecomabmex.com> wrote:
> On Wed, 2006-07-19 at 10:29 -0500, Moises Silva wrote:
> > Carlos. Unblocking the remote side is NOT your responsibility, unless
> > you own the 2 end points :). I suppose you are getting connected to
> > some telco (avantel, telmex, etc), if so, is telco's responsibility to
> > unlock their side.
> >
>         So if the far end does not unblock then the telco has not finished
> activating the line?  I thought that maybe there was a problem in my
> Asterisk configuration.  I will try to use testcall tomorrow.
> Obrigado.
>
> --
> Carlos Chavez Prats
> Director de Tecnología
> Telecomunicaciones Abiertas de México S.A. de C.V.
> Tel: +52-55-91169161 Ext 2001
>
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.4 (GNU/Linux)
>
> iD8DBQBEvsdTVhw7eWImqUMRAs0UAKCH0LKWNiNVsRPwg3eMeuCBJJVIXQCfSQ7h
> awP/80Ga0XN6VBKzrYpoXtA=
> =6xlT
> -----END PGP SIGNATURE-----
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>


-- 
"Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org"