[asterisk-users] Problem with MFCR2
Carlos Chavez
cursor at telecomabmex.com
Tue Jul 18 18:48:32 MST 2006
I just finished installing Asterisk 1.2.10, Zaptel 1.2.7 on a Centos 4.3
64 bit server. I installed all the mfcr2 requirements and Asterisk seems to
be running fine. Now I cannot get unicall to unblock the remote side of the
connection. I see the message that the local end has been unblocked but when
I dial the DID I get a busy tone and I cannot dial out.
I am using spandsp0.0.2pre21, libunicall-0.0.3, libsupertone-0.0.2 and
libmfcr2-0.0.3. These are the same exact versions I use on a different server
that works perfectly. Basically the only difference is that I am using the
newest version of Asterisk and Zaptel and that the server is in another city.
Here is the log for asterisk with the unicall log al 255:
== Parsing '/etc/asterisk/unicall.conf': Found
Loading protocol mfcr2
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Call control(8)
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Unblock
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 1001 -> [1/40000000/Idle /Idle ]
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Channel gains
-- Registered channel 1, mfcr2 signalling
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/2 Call control(8)
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/2 Unblock
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/2 1001 -> [1/40000000/Idle /Idle ]
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/2 Channel gains
-- Registered channel 2, mfcr2 signalling
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/3 Call control(8)
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/3 Unblock
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/3 1001 -> [1/40000000/Idle /Idle ]
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/3 Channel gains
-- Registered channel 3, mfcr2 signalling
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/4 Call control(8)
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/4 Unblock
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/4 1001 -> [1/40000000/Idle /Idle ]
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/4 Channel gains
-- Registered channel 4, mfcr2 signalling
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/5 Call control(8)
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/5 Unblock
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/5 1001 -> [1/40000000/Idle /Idle ]
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/5 Channel gains
-- Registered channel 5, mfcr2 signalling
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/6 Call control(8)
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/6 Unblock
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/6 1001 -> [1/40000000/Idle /Idle ]
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/6 Channel gains
-- Registered channel 6, mfcr2 signalling
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/7 Call control(8)
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/7 Unblock
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/7 1001 -> [1/40000000/Idle /Idle ]
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/7 Channel gains
-- Registered channel 7, mfcr2 signalling
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/8 Call control(8)
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/8 Unblock
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/8 1001 -> [1/40000000/Idle /Idle ]
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/8 Channel gains
-- Registered channel 8, mfcr2 signalling
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/9 Call control(8)
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/9 Unblock
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/9 1001 -> [1/40000000/Idle /Idle ]
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/9 Channel gains
-- Registered channel 9, mfcr2 signalling
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/10 Call control(8)
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/10 Unblock
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/10 1001 -> [1/40000000/Idle /Idle ]
Jul 18 20:27:51 WARNING[21349]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/10 Channel gains
-- Registered channel 10, mfcr2 signalling
Parsing tone set
Hit dial-tone
Step - Frequency=350.00+440.00 [1.00%]Level=-13.00+-13.00 Recognition
length=0.30 [10.00%]
>>>Detector element 350 440 300 0
Hit dial-tone
Step - Cycles=3
Step - Frequency=350.00+440.00 [1.00%]Level=-13.00+-13.00Length=0.10 [10.00%]
>>>Detector element 350 440 60 140
Step - Length=0.10 [10.00%]
>>>Detector element 0 0 60 140
Step - Frequency=350.00+440.00 [1.00%]Level=-13.00+-13.00 Recognition
length=0.30 [10.00%]
>>>Detector element 350 440 300 0
Hit ringback-tone
Step - Cycles=0
Step - Frequency=440.00+480.00 [1.00%]Level=-13.00+-13.00Length=0.40 [10.00%]
>>>Detector element 440 480 330 470
Step - Length=0.20 [10.00%]
>>>Detector element 0 0 150 250
Step - Frequency=440.00+480.00 [1.00%]Level=-13.00+-13.00Length=0.40 [10.00%]
>>>Detector element 440 480 330 470
Step - Length=3.00 [10.00%] Recognition length=0.60 [10.00%]
>>>Detector element 0 0 600 3330
Hit busy-tone
Step - Cycles=0
Step - Frequency=480.00+620.00 [1.00%]Level=-13.00+-13.00Length=0.50 [10.00%]
>>>Detector element 480 620 420 580
Step - Length=0.50 [10.00%]
>>>Detector element 0 0 420 580
Hit congestion-tone
Step - Cycles=0
Step - Frequency=480.00+620.00 [1.00%]Level=-13.00+-13.00Length=0.25 [10.00%]
>>>Detector element 480 620 195 305
Step - Length=0.25 [10.00%]
>>>Detector element 0 0 195 305
Hit number-unobtainable-tone
Step - Frequency=480.00+620.00 [1.00%]Level=-13.00+-13.00 Recognition
length=0.90 [10.00%]
>>>Detector element 480 620 900 0
== Registered channel type 'UniCall' (Unified call processing (UniCall) driver)
*CLI> Jul 18 20:27:51 WARNING[21365]: chan_unicall.c:627 unicall_report:
MFC/R2 UniCall/1 local_unblocking_expired
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:2644 handle_uc_event: Unicall/1
event Local end unblocked
-- Unicall/1 local unblocked
Use EXIT or QUIT to exit the asterisk console
*CLI> Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:627 unicall_report:
MFC/R2 UniCall/2 local_unblocking_expired
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/3 local_unblocking_expired
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/4 local_unblocking_expired
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/5 local_unblocking_expired
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/6 local_unblocking_expired
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:2644 handle_uc_event: Unicall/2
event Local end unblocked
-- Unicall/2 local unblocked
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:2644 handle_uc_event: Unicall/3
event Local end unblocked
-- Unicall/3 local unblocked
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:2644 handle_uc_event: Unicall/4
event Local end unblocked
-- Unicall/4 local unblocked
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:2644 handle_uc_event: Unicall/5
event Local end unblocked
-- Unicall/5 local unblocked
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:2644 handle_uc_event: Unicall/6
event Local end unblocked
-- Unicall/6 local unblocked
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/8 local_unblocking_expired
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/9 local_unblocking_expired
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/10 local_unblocking_expired
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/7 local_unblocking_expired
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:2644 handle_uc_event: Unicall/8
event Local end unblocked
-- Unicall/8 local unblocked
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:2644 handle_uc_event: Unicall/9
event Local end unblocked
-- Unicall/9 local unblocked
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:2644 handle_uc_event:
Unicall/10 event Local end unblocked
-- Unicall/10 local unblocked
Jul 18 20:27:52 WARNING[21365]: chan_unicall.c:2644 handle_uc_event: Unicall/7
event Local end unblocked
-- Unicall/7 local unblocked
--
Carlos Chavez
Director de Tecnología
Telecomunicaciones Abiertas de México S.A. de C.V.
Tel: +52-55-91169161 Ext 2001
More information about the asterisk-users
mailing list