[asterisk-users] RE: Cisco Gateway & CallerID Name

[Peder at NetworkOblivion]

Two follow on questions:

1.  Wouldn't that be for calls from * to the gateway out to the PSTN?  I 
want incoming calls from the PSTN to the gateway to deliver CNAM via SIP 
to my * box.

2.  How would I know if I want/need codeset 6?



mavince at optonline.net wrote:
> In the "interface Serial" section add:
> 
> isdn outgoing display-ie
> 
> This will put the Display IE in codeset 0... if you need it in CodeSet 6 add:
> 
> isdn outgoing ie display codeset_0 shiftcodeset codeset_6
> 
> Mark
> 
>> I seem to remember reading somewhere about a setting on Cisco gateway's 
>> (with PRI) where you can have it send inbound (from PSTN) callerID name 
>> via SIP to *.  Does anybody know what that setting is?  I searched the 
>> archives and can't quite find the right set of keywords to locate that 
>> info.  Thanks.
>>
>> Peder
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 

-- 

Network stuff you didn't know....
http://www.networkoblivion.com