[asterisk-users] SIP To: header

[Steve Langstaff]

Oops, line 3 of the example should have read:

exten => 1111,3,NoOp(${TO_HEADER})

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Steve
> Langstaff
> Sent: 13 July 2006 12:21
> To: sip; Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [asterisk-users] SIP To: header
> 
> 
> Isnt SIP_HEADER(TO) enough?
> 
> e.g.
> 
> exten => 1111,1,Answer
> exten => 1111,2,Set(TO_HEADER=${SIP_HEADER(TO)})
> exten => 1111,3,NoOp(TO_HEADER)
> exten => 1111,4,Hangup
> 
> http://www.voip-info.org/wiki/index.php?page=Asterisk+func+sip_header
> 
> 
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com
> > [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of sip
> > Sent: 13 July 2006 12:12
> > To: asterisk-users at lists.digium.com
> > Subject: [asterisk-users] SIP To: header
> > 
> > 
> > Is there a way to access the actual SIP To: header?  I know 
> > the URI is easily
> > accessible, and is handy for a multitude of things, but in a 
> > scenario in which
> > a call has been forwarded from one URI to another, it's handy 
> > to know whence
> > the forward was initiated (which would only be in the To: 
> > header presumably).
> > Ideally, I need this via AGI, but if it can be accessed 
> > anywhere at all, I can
> > code something up.
> > 
> > N.
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> > 
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>