[Asterisk-Users] Libpri + Zaptel + Asterisk polycom_acd_functionserror message

[Dean at INKnBITs]

I have recompiled with mpg123 and music on hold is working fine. But the
asterisk will not compile the meetme app, using the release 30432. Is there
any way to compile the app manually?


-----Original Message-----
From: Dean @ INKnBITs [mailto:dean.bath at inknbits.co.uk]
Sent: 10 July 2006 13:25
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Libpri + Zaptel + Asterisk
polycom_acd_functionserror message


Is this correct:

zaptel: make clean; make; make install
asterisk: make clean; make; make install

Will this recompile everything needed? I tried, but the meetme app still
does not get compiled (and no music)


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of BJ Weschke
Sent: 10 July 2006 13:03
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Libpri + Zaptel + Asterisk
polycom_acd_functionserror message


 You may need to recompile now that you've got zaptel/ztdummy
installed so that your install sees that the proper zaptel exists now.

On 7/10/06, Dean @ INKnBITs <dean.bath at inknbits.co.uk> wrote:
> After using the trunk versions as below, it all compiled ok, and the
polycom
> acd is working great, but the music on hold and meetme will now work. I do
> not have any digium cards, is the ztdummy installed with the truck
version?
> Or is there any thing I need to change?
>
> Thanks,
> Dean.
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of BJ Weschke
> Sent: 04 July 2006 15:07
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Libpri + Zaptel + Asterisk
> polycom_acd_functionserror message
>
>
> On 7/4/06, Dean @ INKnBITs <dean.bath at inknbits.co.uk> wrote:
> > I have installed libpri 1.2.3 and zaptel 1.2.6 (with make clean, make,
> make
> > install), there was no errors.
> >
> > I used svn to get the polycom_acd_functions asterisk branch release
30432,
> I
> > have to run make 3 times as it as it comes up with making opts re-run
> make.
> > It then completes and I run make install, and get the following error
> > message.
> >
> >
> > chan_zap.c:73:2: #error "You need newer libpri"
> > chan_zap.c:113:2: #error "Your zaptel is too old. please update"
> >
> >
> >
> > Does anybody know why I'm getting these error message, as I have the
> newest
> > versions of both?
> >
>
>  You need the /trunk versions of libpri and zaptel instead of the
> branches/1.2 releases.
>
>
> --
> Bird's The Word Technologies, Inc.
> http://www.btwtech.com/
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>


--
Bird's The Word Technologies, Inc.
http://www.btwtech.com/
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users