[Asterisk-Users] Re: quadBRI in bri_net mode - t3 timer expired

[Sebastian Kayser]

* Paul Hewlett <paul at cottonpickinminds.co.za> wrote:
> On Thursday 29 June 2006 20:08, Sebastian Kayser wrote:
> > i successfully connected our old PBX to an asterisk server with a
> > junghanns quadBRI, the quadBRI ports running in bri_cpe_ptmp mode
> > connected to the interal PBX ISDN ports.
> >
> > Now i tried to turn it round as our PBX depends on it for some features
> > and changed one of the quadBRI ports to bri_net signalling and connected
> > it to one of the external PBX ISDN ports (how do you name that in telco
> > jargon?).
> 
>    did you change the jumpers on the card ?

Yes, i did =) Port 3 is jumpered as NT.

asterisk*CLI> zap show status
Description                              Alarms     IRQ        bpviol     CRC4  
quadBRI PCI ISDN Card 1 Span 1 [TE] (ca· OK         0          0          0     
quadBRI PCI ISDN Card 1 Span 2 [TE] (ca· OK         0          0          0     
quadBRI PCI ISDN Card 1 Span 3 [NT] (ca· OK         0          0          0     
quadBRI PCI ISDN Card 1 Span 4 [TE] (ca· OK         0          0          0     

> > The card led goes green (indicates an ISDN link).

Strange thing here is, the led stays green even if i unplug the cable
...

- Sebastian