[Asterisk-Users] Need to recompile * after changing zap echo method?

[Chris Earle (CBL)]

Hi there,

Don't think you have to recompile * if you've already compiled * with zaptel
before.  (chan_zap.so exists)

Should just have to rebuild zaptel, install the module, and do a ztcfg

Good luck,



----- Original Message ----- 
From: "Brent Torrenga" <lists at torrenga.com>
To: <asterisk-users at lists.digium.com>
Sent: Monday, January 30, 2006 11:34 AM
Subject: [Asterisk-Users] Need to recompile * after changing zap echo
method?


> Dearest List,
>
> I guess I missed this point: Is it true that if you change the echo
canceler
> in zconfig.h, and then recompile/install your zap modules, that for this
to
> be taken into effect by * you must then recompile/install *?
>
> I would have figured that the zap echo cancellation method was independent
> of *, and I don't recall seeing any docs mentioning either way.
>
>
> Sincerely,
>
> Brent A. Torrenga
> brent.torrenga at torrenga.com
>
> Torrenga Engineering, Inc.
> 907 Ridge Road
> Munster, Indiana 46321-1771
>
> 219.836.8918x325 Voice
> 219.836.1138 Facsimile
> www.torrenga.com
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> -- 
> This message has been scanned for viruses and dangerous content by
> MailScanner, and is believed to be clean.


-- 
This message has been scanned for viruses and dangerous content by
MailScanner, and is believed to be clean.