[Asterisk-Users] Re: no progress indications on isdn phone connected to capi card (was: using a Gigaset SX440isdn on a Diva 4BRI?)

[Armin Schindler]

On Fri, 13 Jan 2006, Louis-David Mitterrand wrote:
> On Fri, Jan 13, 2006 at 02:03:20PM +0100, Armin Schindler wrote:
> > On Wed, 11 Jan 2006, Louis-David Mitterrand wrote:
> > > On Tue, Jan 10, 2006 at 06:52:43PM +0100, Louis-David Mitterrand wrote:
> > > > On Tue, Jan 10, 2006 at 05:43:12PM +0100, Armin Schindler wrote:
> > > > > On Tue, 10 Jan 2006, Louis-David Mitterrand wrote:
> > > > > > 	[C:4] 22:0188:202 - D-X(003) 02 01 7F
> > > > > > 	[C:4] 22:0189:202 - D-X(003) 02 01 7F
> > > > > > 	[C:4] 22:0190:202 - D-X(003) 02 01 7F
> > > > > > 	[C:4] 22:0191:201 - MDL-ERROR(G)
> > > > > > 	[C:4] 22:0191:202 - SIG-EVENT FFFF 0A
> > > > > 
> > > > > The diva card is sending (D-X), but does not receive anything (D-R). It 
> > > > > looks like either the cross connection still isn't working or the protocol
> > > > > is wrong.
> > > > 
> > > > OK, making some progress here: I removed "-u" (ptp mode) from the
> > > > divactrl init string and now I can call in and out with my Gigaset
> > > > handset!
> > > 
> > > Calling and receiving calls works but I get no call progress indications
> > > at all until the call is connected. Even when using "immediate=yes" and
> > > landing directly in "exten => s,1,Dial(CAPI/g2//bo)" I get no dial tone.
> > > 
> > > Is there some setting I forgot about?
> > 
> > What version of card/driver/protocol-code do you use?
> 
> pyrrhus:~# divactrl ctrl -c 1 -CardInfo
> 0xfe7a9f00 0x0000ce00 0xfd000000 0xfe7b0000 0x00000000 0x00000000 0x00000000 0x00000000 0x16
> 
> pyrrhus:~# divactrl ctrl --version
> divaload, BUILD (local[102-52]-Sep 27 2005-17:18:38)
> 
> pyrrhus:~# divactrl ctrl -c 1 -CardName
> Diva Server 4BRI-8M 2.0 PCI
> 
> pyrrhus:~# l /usr/share/eicon/te_etsi.* 
> -rw-r--r-- 1 201 200 691696 2003-11-12 15:49 /usr/share/eicon/te_etsi.qm0
> -rw-r--r-- 1 201 200 691696 2003-11-12 15:49 /usr/share/eicon/te_etsi.qm1
> -rw-r--r-- 1 201 200 691696 2003-11-12 15:49 /usr/share/eicon/te_etsi.qm2
> -rw-r--r-- 1 201 200 691696 2003-11-12 15:49 /usr/share/eicon/te_etsi.qm3
> -rw-r--r-- 1 201 200 583968 2003-11-12 15:49 /usr/share/eicon/te_etsi.sm
> -rw-r--r-- 1 201 200 398020 2003-11-12 15:49 /usr/share/eicon/te_etsi.sm.4
> 
> chan_capi is today's CVS version.
> 
> > Please create a verbose log level 5 with capi debug.
> > It maybe because of an older version of protocol code.
> 
> Please find the log attached.

I didn't find any attached file.
Anyway you would need to use new driver/firmware from eicon source RPM.
(Melware will soon provide new driver V3 with full support)

Armin