[Asterisk-Users] External IAX2 phone defined as internal behaving as from PSTN

[Francesco Peeters (Asterisk)]

On Fri, January 27, 2006 16:09, Ian Cowley said:
> Have asterisk at home  1.2.1
> The server is on an internal network eg 10.10.10.10
> It is NAT'd 1:1 via Checkpoint firewall to external public IP eg
> 50.50.50.50
>
> The remote IAX2 phone (ATCOM320) is configured to call 50.50.50.50 on
> extension 1055.
> Outbound calls to 1055 work perfectly.
> Inbound calls from 1055 get picked up as if it were an external call
> (see below) and goes straight to the ring group macro.
> The same phone either on the same internal network to the asterisk or on
> a VPN to said network work fine.  Obviously asterisk thinks this call is
> external.
> How do  change this?
>
<SNIP>

The actual iax.conf part pertaining to this phone might be helpful here...

-- 
F Peeters
  PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
  2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
    Cologne HFC-S pins #52, #54, #55 connected in parallel for synching.
  AMD Duron 1GHz - 1GB - * 1.2.1
  2 Sweex HFC-PCI cards